Wooden vases - The Making of part 1

  • Advertise with us
Blog entry by Diggerjacks posted 07-02-2012 06:02 PM 8564 reads 3 times favorited 3 comments Add to Favorites Watch


I start this blog to explain how I make my wooden vases.

Here is a link for the results :

For this project you need :
A piece of wood 3×3 x 120 cm
(For this project I use pine)
A lathe
A newspaper
A chisel
Sanding paper

And imagination !!!!

1 I cut four pieces of wood : 3×3 x 30 cm

I cut three pieces in a newpaper at the same dimension of the pieces of wood


2 I glue two pieces of wood and I put the piece of the page of the newspaper between the two pieces of wood

3 I clamp the pieces

4 The two others pieces with the same process

5 I scrape the excedent of the glue

6 I glue all the two pieces together

And now I wait a night that the glue dry

Enjoy !

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

3 comments so far

View Bricofleur's profile


1460 posts in 3433 days

#1 posted 07-02-2012 06:28 PM

You can’t never have enough clamps! It’s a good start, Jack. Thanks for showing the process and the progess.



-- Learn from yesterday, work today and enjoy success tomorrow. --

View Roger's profile


20965 posts in 3044 days

#2 posted 07-03-2012 01:59 AM

Very interesting.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed.

View mafe's profile


11771 posts in 3329 days

#3 posted 07-03-2012 09:58 AM

Best thoughts,

-- MAD F, the fanatical rhykenologist and vintage architect. Democraticwoodworking.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics