Deaner's Forum Topics

  • Advertise with us
View Deaner's:homeworkshopprojects (0)blog (0)reviews (0)forum topics (4)buddies (0)favorites (0)activity logWatch
02-25-2016 06:10 PM

Cutting through the sawdust - 3 replies

Hi Jocks, Lots of good stuff always to be found regarding dust collection. Now, if I could just cut through the big technical stuff to get my head around an idea:) I want to put a economical cyclone/dust deputy/seperator ahead of my Jet 1100 impellor to catch the big dust, then, after the impellor, vent outside through my wall into anot...

02-14-2014 04:53 AM

Elmers Multipurpose spray adhesive - 3 replies

Hey gang- I want to try using Elmers spray adhesive to laminate 3/4” wide strips of walnut and cherry together. the strips are 5’ long, 3/4 in. wide and vary from 1/8”-5/8’ thick. I will be gluing these strips face to face and don’t really want to smear the typical glue on these strips…far too tedious an...

08-21-2013 06:43 PM

New MLCS Precision Touter Table - 1 reply

Hi LJocks, Just bought the new MLCS Precision Router Table for $465.00. Set up and instructions were a bit of a bugger, but assembly accomplished none the less.It is a fine tool. Heavy and well built. Grizzly offers the same tool through thier catalog…but it’s on perpetual back order. I looked at both closely, and found them nearl...

10-24-2012 04:51 PM

Plywood Flooring - 19 replies

Well, here I go. I’m gonna put a 3/4” floating plywood floor down on my concrete flloor. Not gonna use any sleepers, and not gonna use tongue and groove either…just good ol’ 3/4” AC grade plywood. I did a vapor test in my shop by duct taping a 14” x 14” square of heavy mil visqueen and observed for the last 10-12 months that no moisture or co...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics