Below is my basic primer on veneering and the vacuum press. There is a lot of information available. This is the basic set that I have been studying.
PRINT RESOURCES
Purchased from JoeWoodworker.com
From my FWW library – available online at FWW
From my FWW library – available online at FFW
From my FWW library – available online at FWW
ONLINE RESOURCES
Funitology Veneering Episodes: Episode 6 - Part 1 Episode 6 - Part 2
Fine Woodworking (subscription required)
Preparing to Veneer MDF and Veneering MDF by William Duckworth
ONLINE VENEERING SUPPLIES AND EQUIPMENT
-- http://foldingrule.blogspot.com
9 comments so far
WayneC
home | projects | blog
6054 posts in 996 days
posted 909 days ago
Great list of resources. Thanks a bunch for sharing. Looks like your weekend is full of woodworking.
-- We must guard our enthusiasm as we would our life - James Krenov
David
home | projects | blog
1982 posts in 1037 days
posted 909 days ago
That it is – I’m in major de-stressing mode!
-- http://foldingrule.blogspot.com
WayneC
home | projects | blog
6054 posts in 996 days
posted 909 days ago
Always good to de-stress.
-- We must guard our enthusiasm as we would our life - James Krenov
mot
home | projects | blog
4904 posts in 935 days
posted 909 days ago
Good for you, David. I’ve got more in-laws this weekend. De-stressing isn’t what I’d call it. I’m dying to get into the shop. Thanks for the list of resources! More to learn!
-- You can discover more about a person in an hour of play than in a year of conversation. (Plato)
Todd A. Clippinger
home | projects | blog
5654 posts in 998 days
posted 909 days ago
I have to figure out how to get my pictures into the blog. I have veneering photos waiting to be seen sitting in my iPhoto.
-- Todd A. Clippinger, Montana, http://amcraftsman.com
WayneC
home | projects | blog
6054 posts in 996 days
posted 909 days ago
David should be able to assist you. He is a Mac user.
-- We must guard our enthusiasm as we would our life - James Krenov
Todd A. Clippinger
home | projects | blog
5654 posts in 998 days
posted 909 days ago
He sent me some info, I have to figure it out. I will get there. I won’t do it tonight. I am too tired and I am not getting sucked into that this late.
-- Todd A. Clippinger, Montana, http://amcraftsman.com
David
home | projects | blog
1982 posts in 1037 days
posted 909 days ago
Todd -
Looking forward to your comments and experience on the veneering blog!
-- http://foldingrule.blogspot.com
Jeff
home | projects | blog
20 posts in 983 days
posted 906 days ago
Thanks for doing this blog, I’ve just started doing some veneering as well, and you have some resources I haven’t seen. I built the joewoodworker.com vacuum press with the 3.3cfm pump and it works great! Looking forward to seeing your work!
-- Jeff, West Linn, OR, http://www.dogwood-design.com