LumberJocks

DaveTPilot's Favorites

  • Advertise with us
View degoose's profile

How to make a endgrain tumbling block butcher block board!

08-12-2009 12:13 PM by degoose | 48 comments »

Hi guys ,, I had a request to make a tutorial with regards the endgrain Tumbling Block Design.First off,.., You need to decide the size of the blocks…. for this example I used 1” stock… Or something similar.. actually just over .. once dressed. Set the blade of the table saw to 60 degrees.. a bevel box makes this simpleI use the INCRA fence system so it is easy to rip bevels off side of the blade.Once the bevels are ripped measure the length of the bevel and move the f...

Read this entry »


View PurpLev's profile

Bowling Alley Workbench #16: The Wheel on the Wagon goes round and round

09-18-2011 05:17 AM by PurpLev | 16 comments »

I wanted to do this for a long time and had the parts ordered and delivered a while ago, but one thing led to another and this was kept on the back burner and never saw the light of day. Ironically, it is now finished but still with no light of day as it is almost 11pm… All it gets is the light of the moon (which some may say is better). I really liked benchcrafted wagon vise (even a free plug for them) But for what it is I think it’s a bit overpriced (for a vise). Don’t ...

Read this entry »


View Marty Backe's profile

How to flush trim face frames with a simple router jig

01-13-2011 10:00 AM by Marty Backe | 13 comments »

In this video I discuss how I attach face frames to my cabinets, and show how a simple router jig can be used to flush trim them to the cabinet sides.

Read this entry »


View ganders's profile

The quick and dirty instructions on how to make a zig-zag pattern cutting board.

08-06-2008 12:26 PM by ganders | 24 comments »

The quick and dirty instructions on how to make a zig-zag pattern cutting board. Click on the pictures to see a full size image. Choose a couple different types of hardwood. The more colors the better. Below is cherry, maple and walnut. Rip strips of wood any width so the total with is about 12”. This is the width that will fit through my planer. The beauty of this is that none of the widths have to be the same. The board shown below is made of scrape wood. If you only have shor...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase