Ok so the stool is done, I have a home repair at the top of the Honeydo, but a new request from Wifey. A rolling paper organizer for her scrapbooking paper. Sounds easy enough, have most of the stuff on hand too.
Gonna use 1/2 plywood for the sides, top and bottom. Have some 1/4 plywood for the back on hand, along with some nice 1/4 hardboard for the shelves.
The top and bottom will be dadoed to the sides and extend past the sides and back so I can add a trim lip to hide the ply’s, give her a finger pull space to pull it around and a lip on the top if she wants to put some beads, pens, or brushes on the top while it’s out (she never has enough workspace either…). Thinking of dadoing the back in too. Shelves will fit in slots on either side. Some will be spaced at 1/2 intervals, others at an inch. The inch spaced ones, which will hold larger stacks of paper, will have a brace at the back to help support the shelve. Trick on this will with finding nice, low profile wheels for it. She wants 4×4 castering; guess she thinks she’ll go off roading or something ;).
Anyways, here’s a couple scans of my plan.
-- What? Me worry?!