LumberJocks

Table Saw Extension / Router Table #4: Starting to take shape

  • Advertise with us
Blog entry by Dave Rutan posted 09-18-2013 11:36 PM 2190 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 3: Working on the top Part 4 of Table Saw Extension / Router Table series Part 5: Top is Done »

Today’s efforts went into building the router table insert onto which the router will be mounted. I laminated a piece of Luan to the 1/2 inch plywood to make it look nice. The underside of the plywood has been routed out to a thickness of about 1/4 inch. I hope to create different throat inserts for when I have smaller work pieces.

I also installed 3 lengths of 3/8 inch threaded rod with which the cabinet will be fastened to the table saw. That way I can remove it if I should want to. The 3 holes in the table saw were there when I bought it, as if it was meant to have accessory wings (which Skil does not sell for this saw.) With the cabinet attached, my table saw will have a max cut width of 24 inches.

-- Ni faru ion el ligno!



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com