LumberJocks Woodworking Forum banner

Carrots and Toe-kicks

3K views 13 replies 11 participants last post by  Mean_Dean 
#1 ·
Carrots and Toe-kicks

Wood Interior design Floor Beam Hardwood


Just recently I got a most of the bugs worked out on my new CNC machine. I am rather confident now that when I hit the "go" bottom - it's going to do what I want. Its been a long haul to get this machine up and running - along with my confidence rising - so is my excitement. But I have other things that must be done and can't just stop and play with it.
Yesterday I spent the day making a new bathroom vanity (part of a total re-do of our main bathroom). I do not like making boxes (cabinets). So in order to make it through the day, I put a carrot out there -I told myself - "as soon as I get the vanity built I can play with my CNC machine".
With everything done except the toe-kick - I decided to get that last bit done with the help of my CNC.

my preview shows the toe-kick image upside down. I have no idea how to make it go upright. I tired turning the image upside then uploading it - same thing.
 

Attachments

See less See more
2
#2 ·
Carrots and Toe-kicks

Wood Interior design Floor Beam Hardwood


Just recently I got a most of the bugs worked out on my new CNC machine. I am rather confident now that when I hit the "go" bottom - it's going to do what I want. Its been a long haul to get this machine up and running - along with my confidence rising - so is my excitement. But I have other things that must be done and can't just stop and play with it.
Yesterday I spent the day making a new bathroom vanity (part of a total re-do of our main bathroom). I do not like making boxes (cabinets). So in order to make it through the day, I put a carrot out there -I told myself - "as soon as I get the vanity built I can play with my CNC machine".
With everything done except the toe-kick - I decided to get that last bit done with the help of my CNC.

my preview shows the toe-kick image upside down. I have no idea how to make it go upright. I tired turning the image upside then uploading it - same thing.
Darrell,

No wonder you've had problems. The CNC machine must be installed upside down!

Herb
 

Attachments

#3 ·
Carrots and Toe-kicks

Wood Interior design Floor Beam Hardwood


Just recently I got a most of the bugs worked out on my new CNC machine. I am rather confident now that when I hit the "go" bottom - it's going to do what I want. Its been a long haul to get this machine up and running - along with my confidence rising - so is my excitement. But I have other things that must be done and can't just stop and play with it.
Yesterday I spent the day making a new bathroom vanity (part of a total re-do of our main bathroom). I do not like making boxes (cabinets). So in order to make it through the day, I put a carrot out there -I told myself - "as soon as I get the vanity built I can play with my CNC machine".
With everything done except the toe-kick - I decided to get that last bit done with the help of my CNC.

my preview shows the toe-kick image upside down. I have no idea how to make it go upright. I tired turning the image upside then uploading it - same thing.
Try holding your camera upside down.

Beautifyl toe kick.
 

Attachments

#4 ·
Carrots and Toe-kicks

Wood Interior design Floor Beam Hardwood


Just recently I got a most of the bugs worked out on my new CNC machine. I am rather confident now that when I hit the "go" bottom - it's going to do what I want. Its been a long haul to get this machine up and running - along with my confidence rising - so is my excitement. But I have other things that must be done and can't just stop and play with it.
Yesterday I spent the day making a new bathroom vanity (part of a total re-do of our main bathroom). I do not like making boxes (cabinets). So in order to make it through the day, I put a carrot out there -I told myself - "as soon as I get the vanity built I can play with my CNC machine".
With everything done except the toe-kick - I decided to get that last bit done with the help of my CNC.

my preview shows the toe-kick image upside down. I have no idea how to make it go upright. I tired turning the image upside then uploading it - same thing.
pretty fancy toe kick Darrell

Wood Rectangle Table Hardwood Gas
 

Attachments

#5 ·
Carrots and Toe-kicks

Wood Interior design Floor Beam Hardwood


Just recently I got a most of the bugs worked out on my new CNC machine. I am rather confident now that when I hit the "go" bottom - it's going to do what I want. Its been a long haul to get this machine up and running - along with my confidence rising - so is my excitement. But I have other things that must be done and can't just stop and play with it.
Yesterday I spent the day making a new bathroom vanity (part of a total re-do of our main bathroom). I do not like making boxes (cabinets). So in order to make it through the day, I put a carrot out there -I told myself - "as soon as I get the vanity built I can play with my CNC machine".
With everything done except the toe-kick - I decided to get that last bit done with the help of my CNC.

my preview shows the toe-kick image upside down. I have no idea how to make it go upright. I tired turning the image upside then uploading it - same thing.
Looks wonderful
 

Attachments

#6 ·
Carrots and Toe-kicks

Wood Interior design Floor Beam Hardwood


Just recently I got a most of the bugs worked out on my new CNC machine. I am rather confident now that when I hit the "go" bottom - it's going to do what I want. Its been a long haul to get this machine up and running - along with my confidence rising - so is my excitement. But I have other things that must be done and can't just stop and play with it.
Yesterday I spent the day making a new bathroom vanity (part of a total re-do of our main bathroom). I do not like making boxes (cabinets). So in order to make it through the day, I put a carrot out there -I told myself - "as soon as I get the vanity built I can play with my CNC machine".
With everything done except the toe-kick - I decided to get that last bit done with the help of my CNC.

my preview shows the toe-kick image upside down. I have no idea how to make it go upright. I tired turning the image upside then uploading it - same thing.
That is a lovely cabinet base. I hope you wire it with fading color LED lights for bathroom mood.
 

Attachments

#7 ·
Carrots and Toe-kicks

Wood Interior design Floor Beam Hardwood


Just recently I got a most of the bugs worked out on my new CNC machine. I am rather confident now that when I hit the "go" bottom - it's going to do what I want. Its been a long haul to get this machine up and running - along with my confidence rising - so is my excitement. But I have other things that must be done and can't just stop and play with it.
Yesterday I spent the day making a new bathroom vanity (part of a total re-do of our main bathroom). I do not like making boxes (cabinets). So in order to make it through the day, I put a carrot out there -I told myself - "as soon as I get the vanity built I can play with my CNC machine".
With everything done except the toe-kick - I decided to get that last bit done with the help of my CNC.

my preview shows the toe-kick image upside down. I have no idea how to make it go upright. I tired turning the image upside then uploading it - same thing.
Maybe you can let us know the ways and whys of a CNC machine as you make your learning journey?
 

Attachments

#8 ·
Carrots and Toe-kicks

Wood Interior design Floor Beam Hardwood


Just recently I got a most of the bugs worked out on my new CNC machine. I am rather confident now that when I hit the "go" bottom - it's going to do what I want. Its been a long haul to get this machine up and running - along with my confidence rising - so is my excitement. But I have other things that must be done and can't just stop and play with it.
Yesterday I spent the day making a new bathroom vanity (part of a total re-do of our main bathroom). I do not like making boxes (cabinets). So in order to make it through the day, I put a carrot out there -I told myself - "as soon as I get the vanity built I can play with my CNC machine".
With everything done except the toe-kick - I decided to get that last bit done with the help of my CNC.

my preview shows the toe-kick image upside down. I have no idea how to make it go upright. I tired turning the image upside then uploading it - same thing.
im with jim, pretty fancy toe kick, im also impressed that jim got it right side up…gee…i wonder if i can ….
Wood Floor Beam Building Hardwood
 

Attachments

#9 ·
Carrots and Toe-kicks

Wood Interior design Floor Beam Hardwood


Just recently I got a most of the bugs worked out on my new CNC machine. I am rather confident now that when I hit the "go" bottom - it's going to do what I want. Its been a long haul to get this machine up and running - along with my confidence rising - so is my excitement. But I have other things that must be done and can't just stop and play with it.
Yesterday I spent the day making a new bathroom vanity (part of a total re-do of our main bathroom). I do not like making boxes (cabinets). So in order to make it through the day, I put a carrot out there -I told myself - "as soon as I get the vanity built I can play with my CNC machine".
With everything done except the toe-kick - I decided to get that last bit done with the help of my CNC.

my preview shows the toe-kick image upside down. I have no idea how to make it go upright. I tired turning the image upside then uploading it - same thing.
well i do have skills…:)
 

Attachments

#10 ·
Carrots and Toe-kicks

Wood Interior design Floor Beam Hardwood


Just recently I got a most of the bugs worked out on my new CNC machine. I am rather confident now that when I hit the "go" bottom - it's going to do what I want. Its been a long haul to get this machine up and running - along with my confidence rising - so is my excitement. But I have other things that must be done and can't just stop and play with it.
Yesterday I spent the day making a new bathroom vanity (part of a total re-do of our main bathroom). I do not like making boxes (cabinets). So in order to make it through the day, I put a carrot out there -I told myself - "as soon as I get the vanity built I can play with my CNC machine".
With everything done except the toe-kick - I decided to get that last bit done with the help of my CNC.

my preview shows the toe-kick image upside down. I have no idea how to make it go upright. I tired turning the image upside then uploading it - same thing.
I thought it was a new box for a Greene and Greene light ceiling fixture. Either way it looks good.

Richard
 

Attachments

#11 ·
Carrots and Toe-kicks

Wood Interior design Floor Beam Hardwood


Just recently I got a most of the bugs worked out on my new CNC machine. I am rather confident now that when I hit the "go" bottom - it's going to do what I want. Its been a long haul to get this machine up and running - along with my confidence rising - so is my excitement. But I have other things that must be done and can't just stop and play with it.
Yesterday I spent the day making a new bathroom vanity (part of a total re-do of our main bathroom). I do not like making boxes (cabinets). So in order to make it through the day, I put a carrot out there -I told myself - "as soon as I get the vanity built I can play with my CNC machine".
With everything done except the toe-kick - I decided to get that last bit done with the help of my CNC.

my preview shows the toe-kick image upside down. I have no idea how to make it go upright. I tired turning the image upside then uploading it - same thing.
Looks good! You can call yours the GNG machine since that is what you will be making;-))
 

Attachments

#12 ·
Carrots and Toe-kicks

Wood Interior design Floor Beam Hardwood


Just recently I got a most of the bugs worked out on my new CNC machine. I am rather confident now that when I hit the "go" bottom - it's going to do what I want. Its been a long haul to get this machine up and running - along with my confidence rising - so is my excitement. But I have other things that must be done and can't just stop and play with it.
Yesterday I spent the day making a new bathroom vanity (part of a total re-do of our main bathroom). I do not like making boxes (cabinets). So in order to make it through the day, I put a carrot out there -I told myself - "as soon as I get the vanity built I can play with my CNC machine".
With everything done except the toe-kick - I decided to get that last bit done with the help of my CNC.

my preview shows the toe-kick image upside down. I have no idea how to make it go upright. I tired turning the image upside then uploading it - same thing.
Maybe you can let us know the ways and whys of a CNC machine as you make your learning journey?

I will try to post stuff as I go alonh
 

Attachments

#13 ·
Carrots and Toe-kicks

Wood Interior design Floor Beam Hardwood


Just recently I got a most of the bugs worked out on my new CNC machine. I am rather confident now that when I hit the "go" bottom - it's going to do what I want. Its been a long haul to get this machine up and running - along with my confidence rising - so is my excitement. But I have other things that must be done and can't just stop and play with it.
Yesterday I spent the day making a new bathroom vanity (part of a total re-do of our main bathroom). I do not like making boxes (cabinets). So in order to make it through the day, I put a carrot out there -I told myself - "as soon as I get the vanity built I can play with my CNC machine".
With everything done except the toe-kick - I decided to get that last bit done with the help of my CNC.

my preview shows the toe-kick image upside down. I have no idea how to make it go upright. I tired turning the image upside then uploading it - same thing.
You can call yours the GNG machine since

That's good - I like that!
 

Attachments

#14 ·
Carrots and Toe-kicks

Wood Interior design Floor Beam Hardwood


Just recently I got a most of the bugs worked out on my new CNC machine. I am rather confident now that when I hit the "go" bottom - it's going to do what I want. Its been a long haul to get this machine up and running - along with my confidence rising - so is my excitement. But I have other things that must be done and can't just stop and play with it.
Yesterday I spent the day making a new bathroom vanity (part of a total re-do of our main bathroom). I do not like making boxes (cabinets). So in order to make it through the day, I put a carrot out there -I told myself - "as soon as I get the vanity built I can play with my CNC machine".
With everything done except the toe-kick - I decided to get that last bit done with the help of my CNC.

my preview shows the toe-kick image upside down. I have no idea how to make it go upright. I tired turning the image upside then uploading it - same thing.
Good looking toe-kick! Am curious what you create with your CNC machine, so please keep us posted.
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top