LumberJocks

DS's Blog

  • Advertise with us
This blog is written by DS | 22 entries so far

Latest Entry

Birth of a 4-axis CNC machine #12: X axis build (again)

06-23-2014 04:47 AM by DS | 8 comments »

I put off assembling the x axis rack and pinion until I was able to purchase the rest of the parts. The y and z axis has to build on the x axis. I bought the linear rails a long time ago, so the y and z were built on top of this. Well, now that I am ready to finish the x axis, I had to remove the y and z from the gantry. The pinion gear assembly took a bit of work but they are finally ready. Due to the depth of the pinion gear and the mounted flanged bearing, I had to build out the ends to get the correct spacing. I debated about banding the edges first or fitting everything then banding.When push comes to shove, I wasn’t certain I wouldn’t be remak...

Read this entry »

Older Entries

View all 22 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase