2 x 4 Project

Part 1: A one entry blog

688 days ago by CutNRun | 13 comments »

Yesterday, I posted a taper jig project. The taper jig was used in my entry for the 2×4 Project. Before the taper jig was made, I had to locate a 2×4 to use. This was relatively easy. I knew a local lumber yard carried very high quality Douglas fir dimension lumber for use in finish work. I located a completely clear, tight grained 8’ board. The only downside was it cost substantially more than the typical big box store stud. Oh well, this is for FURNITURE, not being st...

Read this entry »