| This blog is written by CutNRun | 16 entries so far |
-
DeWalt Radial Arm Saw #3: Making Sawdust
The saw is on its cabinet. The cabinet is mounted on an HTC mobile base, and all alignments have...
-
DeWalt Radial Arm Saw #2: The clean-up continues
I’ve been splitting time between making a storage cabinet to mount the saw on and cleaning ...
-
DeWalt Radial Arm Saw #1: The clean up begins.
I have made a little progress on the saw. I initially thought I would need to replace the carria...
-
Craig's List Bargain
Last Friday I picked up what I believe to be a steal. I located a DeWalt model MBC release 25 ra...
-
Tool cabinet #8: All done and loaded
Just wanted to follow-up and finish this project/blog. The top cabinet is now finished and loade...
-
Wood Scrap Box #3: One more slight adjustment
Well, the jewelry box is assembled and now complete. I assembled everything and did one final tr...
-
Wood Scrap Box #2: Measure twice, cut once
I actually measured very carefully three times; the bottom of the dado would be precisely 3 15/16...
-
Wood Scrap Box #1: Parts and Pieces
Two days before Christmas, my wife casually mentions that she would like a jewelry box. Hmmm, do...
-
Tool cabinet #7: Top mounted tool chest
While it isn’t quite done, I’m about 80% complete with the companion chest to my tool...
-
2 x 4 Project #1: A one entry blog
Yesterday, I posted a taper jig project. The taper jig was used in my entry for the 2×4 Pro...
-
Tool cabinet #6: Almost ready for tools
The tool cabinet is all together and has three coats of Minwax Wipe On Poly applied. All that re...
-
Tool cabinet #5: Another delay
While completing the tool cabinet, I have also been working on a quick and dirty cabinet to mount...
-
Tool cabinet #4: Getting it all together
I was able to spend some time in the shop over the holiday and finished getting the tool cabinet ...
-
Tool cabinet #3: Installing doors and drawers
With purchase of the new tablesaw, I had to install a 240V outlet. I took the opportunity to add...
-
Tool cabinet #2: A break in progress
I didn’t make any headway on my cabinet today, but did make progress on my shop equipment. ...
-
Tool cabinet #1: Putting together the carcase
Prior to joining the list, I began working on a tool cabinet. The plan is from a Wood Magazine i...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
