LumberJocks Interviews #3: Dave Bardin

  • Advertise with us
Blog entry by Cricket posted 06-30-2014 03:09 PM 4228 reads 2 times favorited 31 comments Add to Favorites Watch
« Part 2: The Box Whisperer Part 3 of LumberJocks Interviews series Part 4: bigogre »

The entire time I was reading this story, I was smiling from ear to ear.

I want to share it with all of you now.

What is your inspiration story?

Who did you watch, what was their hobby, and how did you get involved?

As a young boy I worked with my father and grandfather learning any and everything they would show me. My dad was brilliant with his hands and could fix almost anything. My grandfather used only hand tools and would get materials from his land. Everything including the house my Aunt lives in now was cut and milled on the ground it was grown on. As I grew I started working with a restoration company restoring old homes.

Some of the homes we worked on, we would live in for months in while rebuilding and replacing the architecture that was in the original home. This allowed me to save money and go to college. After leaving college and working in a different carrier I have found myself wanting to get back to the old methods of woodworking. Now I have the time to do it for fun and not money.

Power or hand tools? Why?

Hand tools.

This is an argument that can run very deep. It is the same as asking do you cut tails or pins first. Please keep in mind these are my beliefs. I do own power tools I just don’t use them much. I do not have any problems with those who use power tools. They are great and fun to. Here is my reasoning.

First, the toolset is so much smaller. You do not need as many tools to produce the same project.

Second, simply its cheaper. A piece of quarter round takes a saw and two hand planes. If you do it with power, you will need a table saw, joiner, router table and a sander.

Third, I get to know the wood. I learn the woods grain structure. The way it is split, cut and prepared makes it stronger.

Fourth, it is faster. If I need to make 2 drawer fronts I can have them cut and planed before most have their table saw and router table are set correctly.

With that said hand tools are easier and faster for one project. Production work is for power, to me hand tools are for the soul. Look at the centuries of fine furniture that have been made by hand tools and sit in museums and homes today. Not one electron was killed.

What advice would you give to someone just getting started in woodworking?

Find your path. Read, research and investigate all methods. There are many ways to reach the same goal. Which one fits you? Ask questions. You will find the average woodworker is happy to help and share with you. The communities local and online are every where and most of it only costs your time.

If you could build one thing, what would it be? What is your dream woodworking project?

A chest of drawers done in a traditional Japanese method. I would want to use their materials and joinery methods with only hand tools. I would love to learn to do blind mitered box joints, just to name one. This would be only with a few years of instruction from a master. There is a reason there temples have stood for over a thousand years. Japan has a lot of earthquakes to test this.

How did you come up with your nickname?

Do you remember Super Dave Osborne the stunt man? As most of his endeavours would not come out the way he planned. And I loved the humor he portrayed. That is the way a lot of things work out for me. Funny and messed up.

What inspires you regarding woodworking?

Learning the next step in the preparation of my project. There is always something new to learn. Half the fun to me is finding that technique that may not be written down anywhere. So much was passed by word of mouth from master to apprentice. A lot has been forgotten and only with looking at the tools and the furniture they made are we able to unwind these mysteries.The other half is reading and learning from people such as you. Also uncovering the beauty under the bark. I love to see what the grain looks like with a good finish on it. Then to see the faces of the people that take possession of the project.

What are the greatest challenges that you have met in your woodworking journey?

Doing the wood justice in my humble attempts at a project.I am my own worst critic. The project is never good enough. So after it is completed I don’t want it to leave my possession because I know every flaw in it.
I am a novice and know so little.

And, how did you deal with such challenges?

The internet of course is a wealth of information. One of favorite ways is to post here on Lumberjocks and other websites my problem or question. The help you can find or get is great. Most will give you reference to their thoughts and ideas. I do believe there is more than one way to skin a cat. And with that in mind you will have a few ways to approach the issue. The other is to search locally for groups and people that know the trade. This is a bit harder to find but they are out there.

What is the greatest reward that you have received from woodworking?

Making heirloom pieces that my grandchildren will pass down to their kids. I try not to use mechanical fasteners of any kind. Wood is a moving substance that will never stay where you put it.

What is your favorite creation you’ve made in your woodworking?

I did a set of Music Books that are little boxes that were carved to look like books. I had some of the materials obtained through two LJ’s. That and the fact I made them for my wife make them very special.

How did you find LumberJocks and what is it that keeps you coming back?

I had known of this site’s existence for a few years before joining. I found the need to interact so became a member. I have since made dozens of true friends her. Some have past on and I reflect on their wisdom and knowledge. That which I would not have learned unless I met them here. To me a woodworkers heart is big, kind, giving and friendly by nature. They want others to pass on what they know.

So teach a child something today so they will have skill tomorrow.

Dave Bardin

-- Community Manager

31 comments so far

View Smitty_Cabinetshop's profile


15706 posts in 2824 days

#1 posted 06-30-2014 03:19 PM

Excellent interview, and top-notch interviewee. Super is an incredible treasure here on LJs!

-- Don't anthropomorphize your handplanes. They hate it when you do that. -- OldTools Archive --

View Gary's profile


9386 posts in 3639 days

#2 posted 06-30-2014 03:22 PM

Great interview, Dave. It’s good to get to read some of what makes you tick

-- Gary, DeKalb Texas only 4 miles from the mill

View William's profile


9950 posts in 3048 days

#3 posted 06-30-2014 03:30 PM

Don’t let him fool you folks.
Humble as he may be, he is the dovetail and hand tool guru.

I smiled myself while reading your interview Dave.
It reminds me how much I enjoy when you and I get to visit.
I have got to get the time and money to get down your way again soon.


View Gene Howe's profile

Gene Howe

11079 posts in 3634 days

#4 posted 06-30-2014 03:33 PM

Brought a big smile to my face too, Cricket.
Wonderful interview, Dave.

-- Gene 'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. Chesterton

View Monte Pittman's profile

Monte Pittman

30071 posts in 2544 days

#5 posted 06-30-2014 03:35 PM

Great interview. Always love knowing other jocks as people.

-- Nature created it, I just assemble it.

View Don Broussard's profile

Don Broussard

3696 posts in 2457 days

#6 posted 06-30-2014 03:37 PM

Great interview, Cricket! He’s an excellent woodworker and a good friend. The interview didn’t even touch on his blacksmithing skills either.

Nice, Dave. VERY nice.

-- People say I hammer like lightning. It's not that I'm fast -- it's that I never hit the same place twice!

View lightcs1776's profile


4234 posts in 1860 days

#7 posted 06-30-2014 03:41 PM

Great interview. He is incredibly talented with hand tools. His love for them is infectious.

-- Chris ** If there must be trouble, let it be in my day, that my child may have peace. — Tom Paine **

View firefighterontheside's profile


19462 posts in 2062 days

#8 posted 06-30-2014 04:35 PM

Great interview, Dave. Thanks for sharing.

-- Bill M. "People change, walnut doesn't" by Gene.

View Dave's profile


11429 posts in 3046 days

#9 posted 06-30-2014 06:08 PM

All you guys got me smiling! Thank you Thank you.
And a great big thanks to Cricket for this opportunity!
As I have grown I still come here for wonderful advice and most of all you wonderful people!
Yall keep doing what you do and this site will always be a home for us.
Thank each and every one of you.
And Randy to.

-- Superdav "No matter where you go - there you are."

View JL7's profile


8690 posts in 3171 days

#10 posted 06-30-2014 06:54 PM

Yep – Dave’s one of the good ones…..Great choice for the interview Cricket!

Good to hear more of your story Dave….you have a knack at getting to whole story behind things. Makes it a lot easier for the rest of us to ride on your coat tails…..

I can’t wait to see what you try next…...keep it going my friend…...

-- Jeff .... Minnesota, USA

View HillbillyShooter's profile


5811 posts in 2498 days

#11 posted 06-30-2014 07:14 PM

Great interview—thanks to Cricket for helping us get to know our fellow LJs.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View Mainiac Matt 's profile

Mainiac Matt

8566 posts in 2534 days

#12 posted 06-30-2014 07:24 PM

Dave, Dave, Dave….

No one is out there killing hapless little electrons.

We just get them excited and extract their energy as they run back and forth.

Kind of like everyone wishes they could do with 4 year olds :^p

-- I yam what I yam and that's all what I yam

View stefang's profile


16144 posts in 3540 days

#13 posted 06-30-2014 07:45 PM

Great interview, just don’t believe that Dave is a novice like he claims. He is a very highly skilled woodworker and a hero as he has also rescued a lot of old tools from abusive homes, not to mention that he is a great video producer and blacksmith. A man of many talents who unselfishly shares his work with his fellow LJ members among others.

-- Mike, an American living in Norway.

View Doe's profile


1418 posts in 3036 days

#14 posted 06-30-2014 07:51 PM

It’s a board, it’s a plane, it’s Superdav! Thank for sharing your experiences, they’re clear, helpful and a whole lot of fun. From blacksmithing to woodworking, it’s all great and if there was an Oscar for woodworking, it would be all yours.

-- Mother Nature talks, I try to listen

View DIYaholic's profile


19711 posts in 2881 days

#15 posted 06-30-2014 09:36 PM

Thank you for continuing the LJ Interviews.
Without them, many would never had gotten the chance to know Dave, just a tad more!!!

‘Twas nice to learn just a bit more about you.

Dave’s talents are many and varied….
However, his greatest asset is his humble and down to earth personality.
That and the friendship he brings to us all!!!

Carry on, Dave….

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?

showing 1 through 15 of 31 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics