Cory's Blog

  • Advertise with us
This blog is written by Cory | 47 entries so far

Latest Entry

Evolution of a Shop #42: Outfeed Table Progress

03-02-2015 12:22 PM by Cory | 2 comments »

I was able to get a few more things completed on my outfeed table: I cut out the handle area on the dividers, which makes it much easier to grab them. I also glued a small block on the back so the bins don’t slide all the way to the rear of the opening. The top three slots are a little more narrow than the rest, so I turned them into drawers. I’m keeping sanding supplies in there since this is where 99% of the sanding I do takes place. I also built drawers where I was keeping my compressor. And put some drawer fronts on them. This led me to building a little table of sorts to sit my compressor on. The space between my outfeed table and table saw was pre...

Read this entry »

Older Entries

View all 47 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics