George watkins's Blog

  • Advertise with us
This blog is written by George watkins | 1 entry so far

Latest Entry

Nut and bolt in boxwood

12-01-2009 09:54 PM by George watkins | 16 comments »

Here goes- i think this is in the right place- i’m new :-) hello folkshere is a series of photo’s showing how I made a nut and bolt in boxwood for my dad. first of I mounted the wood between centres in the centre holes left behind from the router lathe which my friend used to form the 6 side’s for me(a huge help thank you) here is my rough marking out of proportions here you can see the results of my hand sanding the blank- i used a wooden block, i started at 120 and went through to 600 by which point the boxwood was like glass. here i have made the basic cuts defining the nut and bolt shape here is the pith- will it cause me a problem? at this stage i...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics