| This blog is written by ChunkyC | 15 entries so far |
-
Dust Collector Filter Bags
I converted my dust collector some time ago and added the Wynn Filter to it. I never new what I ...
-
Downdaft sanding table
Guess it’s not technically a table per se maybe a downdraft table top. My last table just ...
-
Rough Sawn Walnut #5: The chip fly
I finished up my flattening jig that I got out of from FWW. It’s built pretty much identic...
-
Dust Collector Installed - Finally!
Well I finally got around to permanently installing my Dust Collector. I’ve was using a 10...
-
Rough Sawn Walnut #4: Flatten Boards without a Jointer
The idea came from FWW I got a chance to play around with getting the angles setup for the adj...
-
Rough Sawn Walnut #3: Finally, back in the shop
Well I finally was able to get back into the shop tonight for the first time since the flue kicke...
-
Rough Sawn Walnut #2: The price we pay
Well I was hoping to start going through the pile and start sorting and cleaning it up. But Sund...
-
Rough Sawn Walnut #1: New Old Wood
I found some walnut on Craig’s list and I picked it up today. Here is still in the truck w...
-
This weekend in the WS
I’ve had a rather productive weekend thus far in the the Yee Ole Workshop. (1) Mounted n...
-
New base for an old Porter Cable Circular Saw #2: Overall, it will do
I got the base all aligned and the blade cut through. I was surprised at how easy the blade plun...
-
New base for an old Porter Cable Circular Saw #1: Part 1 - ready for setup
Right hand sideLeft hand sideThe underside I not certain that this qualifies for a “proj...
-
What was lost ...
I was rummaging through the house looking for my box of 100 1/4-20 Tee Nuts when I discovered my ...
-
Delta 10" Contractor's Saw 36-979
From the manual: ”Assembly Time Estimate – 4-6 hours” I laughed when I read th...
-
Side-By-Side Product Reviews. What gives?
I’m in the market for a new table saw so like every other well informed consumer I’m ...
-
Saw Blade Cleaning - My way?
Well I had some down time in the shop this evening and thought it would be a good time to do some...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
