Greene inspired Night Stand #22: Top finished and Mounting Drawer Runners and Kickers
I’m getting ready to finally wrap this up. I finished the tops and made Drawer runners and kickers. Here is a jpg of the top from the sketchup model. I milled up the kickers then glued and screwed them to the sides of the case. I also drilled holes for mounting the top. I made some drawer runners and screwed them to the drawer member. The front of the runner is dadoed into the front of the drawer with a half lap. Note the taper on the front of the slot for easy insertion. Here is the sliding member screwed to the dust frame. I made the holes a little big so I could adjust the drawers. And some front and back shots. Now for handles a...
