LumberJocks

Cherry Curved-Front Desk #3: Making the back rail and clamping frame together

  • Advertise with us
Blog entry by CharlesA posted 09-08-2014 12:28 AM 1182 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 2: SLOWLY finishing the legs, first glue-up Part 3 of Cherry Curved-Front Desk series no next part

Turns out the next step is making the back rail, clamping it to the glued up sides, and then clamping in a spacer in order to cut out the dovetails for the top, front rail. The back rail was relatively straightforward.

I joint with a plane. It is a great feeling when you get those long shavings at the end of the process.

I also like the impossibly thin shavings you get when using the smoother on the face.

Clamped together and ready for the next step.

-- "Man is the only animal which devours his own, for I can apply no milder term to the general prey of the rich on the poor." ~Thomas Jefferson



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com