LumberJocks

Limbert Lamp Table - Stickley #240 #5: Progress as Promised...

  • Advertise with us
Blog entry by CaptainSkully posted 08-27-2009 07:00 AM 1071 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 4: Template Routing Part 5 of Limbert Lamp Table - Stickley #240 series Part 6: Final Glue Up & Finish »

Today, I was able to glue up the top, cut it out, and sand it. It looks pretty damn cool.

Cross Cut

Sanding

Dry Fit

-- You can't control the wind, but you can trim your sails



1 comment so far

View CaptainSkully's profile

CaptainSkully

1194 posts in 2307 days


#1 posted 08-27-2009 06:49 PM

I forgot to mention that I no longer use any joinery on the table top glue ups. I’ve found that nice edges on the jointer and TiteBond II makes a very strong top. Plus, with no biscuits to contend with, aligning the boards is as easy as whacking the offending piece with a rubber mallet.

-- You can't control the wind, but you can trim your sails

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase