I found another day off, so I immediately ran out into the shop before I could get distracted. I was able to finish the joinery on the base ends. As with everything else in life, the relative ease of the BeadLock Pro has disadvantages in repeata...
|View CaptainSkully's:||home||workshop||projects (30)||blog (74)||reviews (1)||forum topics (20)||buddies (37)||favorites (1145)||activity log|
1463 posts in 3160 days
Location: San Francisco Bay Area
Amateur part time woodworker building a home one piece of furniture at a time. Remodel houses and write websites on the side to pay for my habit. I might end up buying and remodeling a bungalow on Alameda or just sailing off into the Pacific with all of my stuff in storage. For now, I'm just happy making sawdust.
-- You can't control the wind, but you can trim your sails
Latest Activity | view all »
Latest Projects | view all 30 »
Latest Blog Entries | view all 74 »
I was able to squeeze another good day in the shop around work. I ran off to buy some more oak, then got home and planed enough of it down to glue up the stretchers/aprons for the table ends. While the laminations were cooking, I decided to give...
It’s been months since I’ve been able to do any woodworking. I guess being busy in this economy is a good thing. I finally got a couple of days in the shop to address in-progress projects. The biggest was my mental block on the 4-si...
I finally had a day off, so I chopped up the messed up lock-mitered legs by setting the blade right up against the fence at a 45 degree angle. I was able to push the legs through with the help of a featherboard to be as safe as possible. I chopp...
I finally got an afternoon in the shop, so I took my drawings out and was preparing to start slicing up the white oak and walnut plywood into gear-sized squares to send off to my laser guy. It was then that I started going through each page again...