LumberJocks

Calgary Geoff

  • Advertise with us
Blog entry by CalgaryGeoff posted 05-13-2014 06:43 AM 1250 reads 0 times favorited 5 comments Add to Favorites Watch

Thanks

-- If you believe you can or can not do a thing, you are correct.



5 comments so far

View adrianpglover's profile

adrianpglover

37 posts in 267 days


#1 posted 05-13-2014 12:08 PM

Wish I had some money right now and lived somewhere close enough to pic something up.

Good luck with your future endeavors!

View Tyrone D's profile

Tyrone D

314 posts in 1077 days


#2 posted 05-13-2014 04:08 PM

Woah, perfect timing. I should be in Calgary on that weekend.

What part of Calgary are you in?

-- --Tyrone - BC, Canada "Nothing is ever perfect, we just run out of time."

View CalgaryGeoff's profile

CalgaryGeoff

937 posts in 1226 days


#3 posted 05-14-2014 01:24 PM

A Big thanks to everyone for all your comments and support.

If anyone is interested in all lumber inventory or entire shop let me know.
The single little sales of one at a time will kill me.

Saturday May 24, 2014 more details soon.

-- If you believe you can or can not do a thing, you are correct.

View CalgaryGeoff's profile

CalgaryGeoff

937 posts in 1226 days


#4 posted 05-14-2014 01:41 PM

Rough lumber inventory, lots of selection and 1 000 + Bf

Most of the lumber is rough cut, very few if any dressed pieces.

Thickness of lumber ranges from: 3/4”, 1” (4/4), 2” (8/4) and some 10/4 thicknesses.

Widths min 4” range max 16” on some Mahogany 8/4 boards, ouch, I had plans… Most pieces range 5” to 8” widths.

5 bin Box of shorts and narrow pieces, sticks and such.

Enjoy

-- If you believe you can or can not do a thing, you are correct.

View CalgaryGeoff's profile

CalgaryGeoff

937 posts in 1226 days


#5 posted 05-14-2014 02:26 PM

And here are my toys. All have manuals included. Any accessory, jig, spare parts pieces will be included with the appropriate tool. Hope I caught it all here.

Drum sander is a double 5” barrel general with lots of rolls of paper, 5 full, 3 1/2, theses are the $300 per roll rolls. They go with sander, might consider separate. Very long power cord, 20 ft +

Belt 6”x42” and 12” disk general with built in dust collector, it is all powerful at 1.5 Hp 220 volt, 15 amp. Spare sheets and belts go with.

Lots of lathe items General 16×42, variable speed, forward/reverse, inboard/outboard turning, included in its purchase, 21 chisels, 5 chucks in all 1 1/4”, one way stronghold x 2, jumbo jaws on one, massive 3 jaw 8 lbs busy bee chuck, wolverine sharpening system, six sets of jaws, grinder & wheels, face plates, calipers, gauges, marking, center finders for the 1 1/4”, ah, ah, I could go on lots more than in picture. Buffing wheels, sanding stuff, etc, etc. One lot purchase only, not splitting it

Bandsaw is 14” starter model, good little unit, 1 hp 7” max height of cut, comes with a few jigs and such.

Drill press, it’s a floor model, two belts drive it, lots of speeds, 12 or more, big chuck on the beast dang 65mm it’s max size possible, lots of bits and wood to make a nice drill press table for it with plans. Remind me. Any jigs included.

Planer 15” PowerMatic, the golden standard. Extra blades, 3 15”x1/8, 2 sets and one in machine.

Jointer General 8” Long Bed 72”, 3hp, 220v, 15amp, 3 blades, extra set or two, one in machine.

Oscillating spindle sander on stand, general with 5 sanding tube sizes, wrenches, some extra sanding tubes

Jessem solid tube steel welded up Router table, all the stuff is matched up really nice. Jessem equipment all round. Router lift stuff it’s all there. And a Porter Cable 7518 3.25 hp beast of a router, variable 5 speed machine with hand held option. Lol, good luck. Some options included but not bits. Shims for jointer use, works awesome.

Clamps, lots and many styles and sizes. Get them all, and your clamp wall gets smaller. Pipe claps, and extra pipes lengths, many not in picture.

-- If you believe you can or can not do a thing, you are correct.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase