LumberJocks

CL810's Blog

  • Advertise with us
This blog is written by CL810 | 3 entries so far

Latest Entry

Crisscross, David Barron, and Danish Oil walk into a bar... #3: It's all done but the finishing

230 days ago by CL810 | 3 comments »

I always do a test board using the finishes I’m considering for a project. This is the maple sample board for the bench build. The left section has two coats of Danish Oil. The middle is two coats of BLO. It is noticeable in the first two sections the effect of the oil on the maple’s appearance. The wood took on a dirty and somewhat blotchy appearance that I did not care for. Remember that the grain that is so striking in the first two sections also runs thru the right section. For that reason I wanted to “smooth” it out with Sealcoat. The right section has one coat of Sealcoat shellac (1 lb. cut) followed by a light sanding and then two applica...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase