LumberJocks

Salvaged Wood Roubo Style Workbench

  • Advertise with us
Blog series by Bugnurd updated 12-18-2014 11:46 PM 2 parts 8583 reads 5 comments total

Part 1: Top (mostly) and legs (well, leg)

11-07-2014 01:56 AM by Bugnurd | 3 comments »

My office building where I work is upgrading their HVAC system, and the new equipment was delivered packed in long crates. The wood was going to be scrapped so I loaded up my hatchback and brought it home. Now I figure I have to make a proper workbench, since I’ve been making do with a wobbly 1950’s kitchen table on hairpin legs (cool table, but it makes a crappy workbench). I like how the Roubo style benches look, and they seem pretty straightforward to build. I found Chris Sc...

Read this entry »


Part 2: Legs, joints, and the top gets wider

12-18-2014 11:46 PM by Bugnurd | 2 comments »

I’ve been (very) slowly plugging away at my workbench here and there. I think I finally have made enough progress for another post. I noticed that the 2×6 that I had for my last leg was pretty twisted and knotty. I glued it up to see if I could just plane out the twist, but it proved to be a royal pain in the butt, and I figured it would only complicated matters down the line, so I went to the store and picked through the pile until I found a nice straight one. This one glued up...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com