My wife wants to move her sewing table into our bedroom so that has brought about a few changes. To get the table in the TV has to go someplace but it can’t leave the room.
This is one of those spur of the moment deals where I took a few measurements and headed to the shop. Looking around I decided to use 1×4’s that once served as bed slats and a piece of 7/16 OSB that was left over from building my benches.
The shelf is now hanging from the ceiling joists with a first fresh coat of polly. I will do at least two more coats. The next time you see this one it will be in the projects board.
Enjoy!
6 comments so far
Thos. Angle
home | projects | blog
4013 posts in 856 days
posted 793 days ago
Buck,
That ought to take care of the problem. Did you torch it? Neat design.
Tom
-- Thos. Angle
snowdog
home | projects | blog
808 posts in 876 days
posted 793 days ago
I like the shape, show us what it looks like when you install it.
-- "so much to learn and so little time"..
TreeBones
home | projects | blog
1557 posts in 917 days
posted 793 days ago
I’ll be looking for the finished project. Great start.
-- Ron, Twain Harte, Ca. Portable on site Sawmill Service http://westcoastlands.net/Sawmill.html http://westcoastlands.net/SawBucks2/phpBB3 http://www.portablesawmill.biz/concrete/
Buckskin
home | projects | blog
484 posts in 881 days
posted 793 days ago
Tom, yes I torched it. I thought I would do something I had not seen done in long time.
I hope to have it done this weekend.
Karson
home | projects | blog
25792 posts in 1294 days
posted 793 days ago
Good job Buckskin. It will be interesting to see it done.
-- What happens in the workshop stays in the workshop. No wait that doesn't sound right. Karson Southern Delaware karson_morrison@bigfoot.com †
squeak
home | projects | blog
3 posts in 804 days
posted 780 days ago
Buck just saw your tv shelf great idea and I really liked the torch thing i have don e the same thing on a few projects and it is a great way to make pine look good ..
Squeak