LumberJocks

TV 3 piece wall entertainment unit #1: crown

  • Advertise with us
Blog entry by BryanatWoodstock posted 624 days ago 1742 reads 1 time favorited 8 comments Add to Favorites Watch
no previous part Part 1 of TV 3 piece wall entertainment unit series Part 2: crown »

Clients drawing very similar to this one. Except no shelf above tv, doors on bottom of tall cabinets. He supplied 100 bd ft of 4/4 ash cut from his bush. Big item to build in my over crowded hobby shop!

I’m making the cabinets from 3/4” poplar core oak veneer I got at HD. Had them slice them up to make it easier to handle in my small shop. Set up the Laguna scoring saw and cut the dadoes.

Assembled the cabinets, made up face frames using pocket screws, then biscuits to hold to the cabinet

I made up crown that will be attached to the top of the cabinets and bridge.

ripping waste off at 45 degrees

made extras !

Got the top edge made, glued to one cabinet. Cut and test fit the crown.



8 comments so far

View pintodeluxe's profile

pintodeluxe

3254 posts in 1408 days


#1 posted 624 days ago

Coming along nicely!
The crown is impressive.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View Fuzzy's profile

Fuzzy

289 posts in 2583 days


#2 posted 618 days ago

NICE !!! That’s really close to something I was planning, and it’s a great inspiration !!!

Got any rough dimensions/plans that you would want to share ???

-- - dabbling in sarcasm is foolish … if you’re not proficient at it, you end up looking stupid … ... ...

View BryanatWoodstock's profile

BryanatWoodstock

97 posts in 629 days


#3 posted 618 days ago

75” tall, ends are 24 wide and 24” deep. Centre is 57” long, 24” high, 24 deep

View Ken90712's profile

Ken90712

14821 posts in 1784 days


#4 posted 609 days ago

Looking really good.

-- Ken, "Everyday above ground is a good day!"

View Fuzzy's profile

Fuzzy

289 posts in 2583 days


#5 posted 595 days ago

Would you mind posting a profile of your crown when you get a chance ??? I think it looks amazing on that piece !!!

-- - dabbling in sarcasm is foolish … if you’re not proficient at it, you end up looking stupid … ... ...

View BryanatWoodstock's profile

BryanatWoodstock

97 posts in 629 days


#6 posted 595 days ago

crown profile answer

shop made moulding using 1/2 r round over for the top edge and a edge bit, a round over with a long slope to it Maybe like this bit C1535.


Grizzly moulding knife G4538

View Fuzzy's profile

Fuzzy

289 posts in 2583 days


#7 posted 595 days ago

thanks … ... ...

-- - dabbling in sarcasm is foolish … if you’re not proficient at it, you end up looking stupid … ... ...

View Beginningwoodworker's profile

Beginningwoodworker

13337 posts in 2268 days


#8 posted 591 days ago

Looks good!

-- CJIII Future cabinetmaker

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase