I made up a jig for the colt router to accurately cut width and depth for the hangers. I use another trim router to cut relief slots for the hooksBy adding a spacer block to the jig, cut the mortise on the ends of the bed rails.Added a 1.72×2...
|View BryanatWoodstock's:||home||workshop||projects (8)||blog (25)||reviews (0)||forum topics (0)||buddies (0)||favorites (0)||activity log|
None so far
58 posts in 206 days
Location: Woodstock, On Canada
Latest Activity | view all »
Latest Projects | view all 8 »
Latest Blog Entries | view all 25 »
Hauled out the floor mortiser today,top tenon has been tapered to 3/4” hand plane to fit then trace for top mortise, cut 1/16” extra on top and bottomI made 2 V blocks same width as bottom post to hold mid section centredfitting goodTh...
This weekend, I have been working on the head and footboards, cutting the side arcs out with a jig saw. I cut the headboard 1st, then used it to trace the cut line for the footboard.I also belt sanded the tops smooth. The Festool vac only captures...
cut the 2” Long x 3/4” tenons with the dado blade. Made a jig to draw the arch on 4/4 stocksanded panelsanded inside curve of arch4 passes with a multi profile bitclamped up!
using 6/4 for the head board. Design as I go, decided to use the 11” planks full size , against the taller bed post. Looks like the headboard will be 4” taller than the last bed I made like this.12”jointer getting some use!planed...