Just a short blog as there’s not much left to do. I need to cut the slots to accept the bottom.
The end stop is cunningly sized so that the sides with legs don’t foul it. Slot 1.6 mm deep.
Final tape up ready for gluing
and glued up (PVA) with the top taped on (but obviously not glued) to maintain the box shape whilst drying.
Next time you see it will be when I’ve taken the top edges down a bit with 600 grit (they are razor sharp at the moment) and applied the final finish, posted as a project.
Be seeing you.
-- Martyn -- Boxologist, Pattern Juggler and Candyman of the visually challenging. http://www.theartofboxes.com