LumberJocks

BritBoxmaker's Blog

  • Advertise with us
This blog is written by BritBoxmaker | 187 entries so far

Latest Entry

I have a little vise #6: Los Endos

07-11-2015 12:37 PM by BritBoxmaker | 8 comments »

Well it’s been a week and the paint, as they say where I come from, is well ‘ard. Hard enough to complete the job. First thing is that whilst the sliding carriage will fit into the main casting the jaws won’t fully close up Traced this problem to burrs on the sliding carriage, both sides, here shown cleaned up (with a file) It now slides all the way home Next to install the threaded end stop Whilst the thread for the stop, in the base of the casting, was OK it felt a little soft when screwing the bolt in tight so I took a look at the underside I reckon there’s enough thread there for a backing nut and this shouldn’...

Read this entry »

Older Entries

View all 187 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com