I decided to tackle the twisted stem section in parallel with the padlock and I kind of jumped between the two as I progressed. First off, I drilled a hole all the way through the padlock. Then I pared down the thickness of the padlock t...
|View Brit's:||home||workshop||projects (21)||blog (56)||reviews (1)||forum topics (18)||buddies (164)||favorites (180)||activity log|
6354 posts in 2176 days
Location: Christchurch, Dorset, England
Latest Activity | view all »
Latest Projects | view all 21 »
Latest Blog Entries | view all 56 »
I was going to do the padlock next after roughing out the chain, but once I started on the chain I was enjoying myself so much that I just kept right on going. If you remember, this is how the spoon looked at the end of the last session. Wo...
Now it is time to carve the bowl of the spoon. Since the top surface of the spoon bowl needs to be lowered somewhat and I will lose my drawing of the heart, I started by roughly shaping the perimeter of the bowl so I didn’t lose the shape. ...
In this episode, I show you how I tackled the caged ball section of the Welsh Love Spoon. I started by squaring the outside of the cage and transferring the aperture opening to the other three sides. I then marked the diameter of the ball on the o...
On my woodworking bucket list, I’ve always wanted to have a go at carving a ball in a cage and a chain. With this in mind, I decided to incorporate these elements into my next spoon project (This will be my 4th spoon). So I grabbed a suitabl...