|View Branlon's:||home||workshop||projects (4)||blog (0)||reviews (0)||forum topics (3)||buddies (19)||favorites (18)||activity log|
|01-25-2012 05:33 PM||
Dining room table, Mission style, solid ash - 2 replies
Open for suggestions on the dimensions of the table top overhang. The top will be about 41” x 75” x 7/8”. The Mission style ends are finished, see photo, and now the length and width of the under-structure needs to be determined. The table top will not have an apron around the edges and will not have breadboard ends. It ...
|12-06-2008 02:21 AM||
Crooked dowel hole - 1 reply
A crooked 5/8” dowel hole in the bottom of my chair leg needs to be re-drilled. When I stick a 3 foot dowel rod in the hole and step back to see if the hole was drilled straight, the angle must be off by 10 degrees or more. The chair leg is Walnut and I would rather not replace it. If the hole is glued and plugged tight, will I be able ...
|11-27-2008 06:28 PM||
How to see the Walnut grain better - 9 replies
What’s the best way to “temporarily” bring-out the grain in a piece of sanded Walnut without worrying about how it will be finished later?