LumberJocks

Brad_Nailor's Workshop

  • Advertise with us
Workshop by Brad_Nailor posted 1663 days ago 2623 reads 3 times favorited 14 comments Add to Favorites Watch

View all workshops »

View Brad_Nailor's profile

Brad_Nailor

2531 posts in 2584 days


click the pictures to enlarge them

Brad_Nailor's Workshop Brad_Nailor's Workshop Brad_Nailor's Workshop
Brad_Nailor's Workshop Brad_Nailor's Workshop Brad_Nailor's Workshop

click the marker to see the address

Here are some pictures of my shop.

-- http://www.facebook.com/pages/DSO-Designs/297237806954248


14 comments so far

View CanadianWoodChuck's profile

CanadianWoodChuck

395 posts in 2540 days


#1 posted 1663 days ago

Dave
Delta & I believe Rikon used to have shop layout programs on their websites which is a great way to figure out where equipment will fit the best without using paper cut outs. If that software is not available anymore I have some freeware that will do the same thing. Just let me know if you want/ need it. Bruce

-- Wood Chuck (Bruce) http://3dwoodworkingplans.com

View Padre's profile

Padre

930 posts in 2115 days


#2 posted 1663 days ago

Good for you David! If you need a hand with something really awkward, I’m only about 10 minutes away.

-- Chip -----------http://www.penmanchip.com-----------------Micah 6:8

View Scott Bryan's profile

Scott Bryan

27251 posts in 2448 days


#3 posted 1663 days ago

David, I will be looking forward to seeing pictures of your shop.

-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine

View a1Jim's profile

a1Jim

112010 posts in 2203 days


#4 posted 1663 days ago

Yea photos, Were are they Brad

-- http://artisticwoodstudio.com Custom furniture

View woodworm's profile

woodworm

14124 posts in 2217 days


#5 posted 1663 days ago

Would be nice to seeing some pictures.
Wish all the best and good luck!

-- masrol, kuala lumpur, MY.

View Wickate's profile

Wickate

69 posts in 1420 days


#6 posted 1320 days ago

Is the bench top and surrounding box for the SCMS for storing it out of the way, or dust collection? Looks intriguing.

Chad

View Brad_Nailor's profile

Brad_Nailor

2531 posts in 2584 days


#7 posted 1320 days ago

The box is a dust collection shroud. I cobbled it together from 1/4” hardboard and scraps of 1/2” baltic birch. There is a commercial plastic dust collection shroud in the bottom, and it is mounted on a french cleat system so it can slide to the left to cut angles. It works pretty good, I’d say captures 90% of the dust.

-- http://www.facebook.com/pages/DSO-Designs/297237806954248

View CanadianWoodChuck's profile

CanadianWoodChuck

395 posts in 2540 days


#8 posted 1320 days ago

Dave that is the cleanest shop I have seen, I even zoomed in looking for sawdust – just can’t find any :) Looks like a great use of the space.

-- Wood Chuck (Bruce) http://3dwoodworkingplans.com

View Scott Bryan's profile

Scott Bryan

27251 posts in 2448 days


#9 posted 1320 days ago

David, this is a pretty nice looking shop that you have to work in. It looks to be well organized and, between the window and the glass in the garage door, it looks like you get quite a bit of natural light in there. Your miter saw station looks pretty good. I have come to appreciate putting the saw below the bench, as you have done. This frees up the bench for other uses when the saw is idle. In my shop I built extension wings for the saw and these tend to eat up quite a bit of real estate.

Thanks for the pictures. I enjoyed taking a tour of your shop.

-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine

View BTKS's profile

BTKS

1967 posts in 2091 days


#10 posted 1320 days ago

Great lookin shop! I really like that Makita CMS. My older version of it has and continues to work perfectly. Looks like an efficient layout too.
Later, BTKS

-- "Man's ingenuity has outrun his intelligence" (Joseph Wood Krutch)

View Brad_Nailor's profile

Brad_Nailor

2531 posts in 2584 days


#11 posted 1320 days ago

Thanks everyone. I like the SCMS station, but it does eat up alot of real estate in a small shop. I wish they had the new BOSCH articulating SCMS when I purchased the Makita…I mean I love the Makita, but the BOSCH would work better in a smaller shop. The dust hood for the SCMS was “engineered” on the fly as I built it. It didnt have the MDF wings at first and a lot of dust got out (which I promptly swept up…Bruce!) I added the wings and now I get really great DC and it seems to have increased the suction a little. I could have compromised a little and moved the table saw closer to the garage door, but I wanted to be able to work with at least a 6 foot long piece of wood with the door closed. I have been working on tweaking the shop so much, and remodeling my bathroom, I haven’t even really had a chance to attempt a serious project yet….

-- http://www.facebook.com/pages/DSO-Designs/297237806954248

View sillac's profile

sillac

644 posts in 1390 days


#12 posted 1320 days ago

Nice looking shop you have there, I like the out feed on the TS, and the dust hood around the MS. Way to go, and keeping the dust cleaned up is great, hope I can do as good of a job when my shop is finished. Steve in Oregon

-- Steve in Oregon,

View Beginningwoodworker's profile

Beginningwoodworker

13337 posts in 2299 days


#13 posted 1211 days ago

Nice looking shop.

-- CJIII Future cabinetmaker

View Roger's profile

Roger

14318 posts in 1430 days


#14 posted 712 days ago

Gr8 shop. Loads o fun waiting in there.

-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase