Bovine's Forum Topics

  • Advertise with us
View Bovine's:homeworkshopprojects (3)blog (0)reviews (0)forum topics (6)buddies (10)favorites (17)activity logWatch
09-06-2010 06:42 AM

Should I Frame the Router Table? - 3 replies

I’m designing a mobile router table. It’s going to hold an Incra LS17 fence, so I’ve decided to go with an offset design. I really like Blake's router table and you’ll notice the influence. Here is what I’ve got so far: Anyway, I’m probably going to build it out of 3/4” Oak Plywood and maybe Re...

07-23-2010 05:38 PM

Lines from Hand Plane - 13 replies

I’m having a problem with “lines” or gouge marks when I plane pine. I know this is really soft wood and it likely wouldn’t happen on hardwood. I’m wondering if anyone has any ideas why this is happening. I’m using a Lee Valley Low Angle Smoother a 38-degree bevel and it is freshly sharpened. As I...

01-23-2010 07:22 AM

Statistic of the Day - 8 replies

This just in…. 9 out of 10 constipated people don’t give a crap!

01-17-2010 11:09 PM

Stupid Tablesaw...Stupid operator - 8 replies

I just had one of those moments where I was so angry and frustrated that I just had to leave everything as it was and walk out of the shop. If I start working again, I’m going to screw up more or get myself hurt. >>Yells at the top of his lungs<< OK, that feels better. Just a bit better.I’m making 6 Spagnolo-style cutti...

04-18-2009 05:32 AM

Evening out the inlay - 8 replies

Related to my previous post on the jewelry box I’m making…..On the sides of the box, I’m putting in a simple inlay. I’ve cut a 3/4” groove in the sides and I’ve glued in a strip down the center of the sides. I like the looks of contrasting wood. Anyway, the inlay strip is raised up about 1/8” or so. ...

04-18-2009 05:08 AM

Finishing after resawing - 4 replies

I’m making a jewelry box and have 3/4” stock that I’m going to resaw down to 1/2” on my bandsaw. I’m really new to this, but I’ve made some practice cuts and have found my saw to cut very straight with a 1/2” blade. My question is, once I’m done, how do you recommend finishing the resawn side? ...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics