| This blog is written by Bothus | 35 entries so far |
-
Gettin' fixina tune up my Unisaw #25: All done
It is complete the videos show me cutting pieces of 1-1/4” teak and running the nickel tes...
-
Gettin' fixina tune up my Unisaw #24: Mounting the motor
Hi guys. I guess I’ve been gone awhile but I’m finally ready to work on the Unisaw ag...
-
Tommy Mac
Cool stuff. http://www.finewoodworking.com/item/27512/woodcraft-signs-on-to-sponsor-tommy-macd...
-
A day in the life #1: I should have washed my truck first..
...or at least cleaned the windows.
-
If I'd known..
If I’d known this was going to be a recurring theme I would have started a series…
-
Happy Holidays
-
Gettin' fixina tune up my Unisaw #23: I miss my Unisaw
Well, I don’t actually miss it. I have to wheel it out of the way every time I want to get ...
-
Delta DW735 Planer
I know this isn’t the best deal some of you lumberjocks have gotten on this planer but I...
-
Look at that! #3: I filled the empty spot next to my Craftsman TS...
with my Delta Bandsaw. The guy called me about 8:30 and he was at a restaurant about 10 minute...
-
Look at that! #2: I was supposed to pick up my Delta bandsaw today but that's not gonna happen
So yesterday I called the guy I bought the bandsaw from to confirm the time for me to pick it up ...
-
Gettin' fixina tune up my Unisaw #22: Unisaw Update
Well it says that it’s been 8 days since my last Unisaw post but that can’t be right ...
-
How to find and harvest legal melamine
Disclaimer: My apologies in advance to OregonBurls. Greg I hope you have a sense of humor. -...
-
Dennis Zongker inspired me.
Dennis you inspired me by entering your work in the Cure for the Common Cabinet contest at finewo...
-
Look at that! #1: There is an empty spot just to the right of my Craftsman contractor's saw.
Good thing I won the ebay auction for this Delta Bandsaw. I won’t be abl...
-
Gettin' fixina tune up my Unisaw #21: Side by Side Comparision of cleaning products.
Well I took a few minutes before dinner tonight to test the cleaning/degreasing products I bought...
-
Gettin' fixina tune up my Unisaw #20: Rolling Hills is just down the road a piece...
...just drive past Rockler and keep going. Yeah right. Pitch and resin remover. After I left ...
-
Gettin' fixina tune up my Unisaw #19: What to use?
Hi guys, The helmet cam I ordered came in today. I used it for this video. It’s not ma...
-
Gettin' fixina tune up my Unisaw #18: Disassembling the motor to replace the bearings.
I cheated a little on the Honey Do list and started on the motor. Motoring. No need to film th...
-
Gettin' fixina tune up my Unisaw #17: Took the Unisaw home today
I decided to take the Unisaw home today since it was disassembled and reassemble it there. The...
-
Gettin' fixina tune up my Unisaw #16: Changing the arbor bearing... finally!
Today I finally got a chance to work on my Unisaw again. I wasn’t really sure what I was do...
-
Gettin' fixina tune up my Unisaw #15: It's not as bad as I thought
In yesterday’s video I rechecked the runout on my arbor and blade after cleaning them. I wa...
-
Gettin' fixina tune up my Unisaw #14: Checking blade runout
Hi All, Since I will have to work late tonight and tomorrow night, I went over on my lunch hou...
-
Gettin' fixina tune up my Unisaw #13: I got the parts from Delta (DeWalt, Black and Decker, whatever)
I got he parts in today for my Unisaw. Unfortunately I did not have time to work on it… but...
-
Gettin' fixina tune up my Unisaw #12: Run out! Now, while you still can!
Hi Guys, In my 15 minutes of free time today I decided to check the run out on my arbor with m...
-
Gettin' fixina tune up my Unisaw #11: Wax on, wax off... except for the off part.
Hi Lumberjocks, Today was another day of doing things around the house. I did steal a few minu...
-
Gettin' fixina tune up my Unisaw #10: You gotta do whatcha gotta do
Hi Lumberjocks, I couldn’t believe what a productive day it was today. Unfortunately, I ...
-
Gettin' fixina tune up my Unisaw #9: Saving the top
First let me say I’m not very impressed with DeWaltServiceNet.com. I couldn’t order ...
-
Gettin' fixina tune up my Unisaw #8: Take the good with the bad
It wasn’t a very productive day as far as getting any work done on my Unisaw but it was ver...
-
Gettin' fixina tune up my Unisaw #7: The week in review...
First of all I just added a couple of videos to yesterday’s blog entry that I didn’t ...
-
Gettin' fixina tune up my Unisaw #6: Another sad day...
Since I was out of the office today I didn’t get to work on my Unisaw again… well may...
-
Gettin' fixina tune up my Unisaw #5: It's a sad day...
... I didn’t get to work on my project today. But I was able to pay it a visit anyway. T...
-
Gettin' fixina tune up my Unisaw #4: Take only memories, leave only footprints
Today I went into the shop to put the tools and equipment I used back where they go for the guys ...
-
Gettin' fixina tune up my Unisaw #3: Disassemble! (Don't worry Johnny 5 you're safe)
Starting out about 2PM I will start by removing this melamine top Fortunately there aren’...
-
Gettin' fixina tune up my Unisaw #2: A few more photos, videos and status report
Unisaw serial number label Unisaw motor serial number label I welcome everyone’s c...
-
Gettin' fixina tune up my Unisaw #1: Initial photos and videos
I bought this table saw from my boss for $500. I thought it was the one we used to use before we ...
