LumberJocks

A catalog of failures

  • Advertise with us
This blog is written by BobFrankly | 2 entries so far

Latest Entry

Router Table #1: Cabinet and surface

10-20-2015 06:10 PM by BobFrankly | 1 comment »

It doesn’t take very many attempts at routing smaller pieces of wood to see the benefit of a router table. Midway through my Walnut Lamp project, I got some ideas floating through my head that couldn’t happen without the router table. So my once router table cabinet, now wood scrap holder, is once again a router table cabinet. I started with a rectangle 1×2 base joined by glue and pocket screws, some casters, and a plywood shell: I was mostly using leftover ply from other projects, not thick enough to get a usable dado in. So I ended up putting down some little scrap pieces so I would have something to hold the boards that separate the compartments in place, and I spra...

Read this entry »

Older Entries

  • Walnut Lamp #1: Inlays - 09-18-2015 04:53 PM | 1 comment

    This article comes partway through the project. I’ve completed the shaping on the base, and...


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com