| This blog is written by Boatman53 | 12 entries so far |
-
Tool box #6: Some tools for the box
I’ve spent my available time lately making or modifying some of the tools that are going to...
-
Tool box #5: Back panel
Got some more work done on the tool box earlier this week. I made and fitted the back panel. All ...
-
Tool box #4: Dovetailing the box
Since no one could give me a reason not to use the different dovetail spacing I went ahead cut th...
-
Tool box #3: Dovetails
I did some experimenting with some dovetail layouts this weekend and this is what I’ve got ...
-
Tool box #2: French fitting
I stayed late at the shop and fitted all the tools in the door. I’m just too excited, and w...
-
Tool box #1: Second layout
I couldn’t help it so I spent some more time on the box today. I made a new door, this one ...
-
Tool box
Inspired by that little tool box I posted on the hand tools forum I’ve decided to build a s...
-
Setting precision angles #3: The framing square
The framing square The bevel board and the sine bar, as good as they are, have one drawback, l...
-
Setting precision angles #2: The Sine Bar
The sine bar The next leap for me in setting angles precisely was the rediscovery of the s...
-
Setting precision angles #1: The bevel board
I often read posts from people having trouble setting angles on machines or wherever. So I though...
-
Parallel jaw leg vise pt #2
I have up loaded the installation instructions for the sprocket in a new bench build and would lo...
-
Parallel jaw leg vise
For about a year now I’ve been trying to refine the detail of my parallel jaw leg vise and...
