Tool Gloat

  • Advertise with us
Blog series by Bluepine38 updated 08-28-2011 09:18 PM 1 part 8307 reads 3 comments total

Part 1: No good deed goes unpunished

08-28-2011 09:18 PM by Bluepine38 | 3 comments »

A friend asked me to keep an eye open for a small lathe, I found an old 10” Delta Lathe for $70, but itcame with a lot of junk, I had to take it all. On the lathe bench were these old chisels. The biggest measures 21” long by 2” wide and is stamped L & IJ WHITE 1837 Buffalo, NYthe middle one measures 16-1/2” long by 1-1/2” wide and the tang is stamped Mfd by UNION HARDWARETORRINGTON CONN USAThe smallest is 13-3/8” X 13/16” with no name ...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics