LumberJocks

sharpen knives

  • Advertise with us
Blog series by Bluepine38 updated 08-16-2011 02:43 AM 1 part 6283 reads 0 comments total

Part 1: Lathe accessories

08-16-2011 02:43 AM by Bluepine38 | 0 comments »

I was making carving knives for the Spoontaneous collaboration and needed to sharpen them. While atNorthwest Industrial Supply I found some 3M scotchbrite deburring and polishing wheels, similar to a grinding wheel but different. I did not want to add another machine to my shop, I have a couple of sharpening systems now. The scotch brite wheels had a 1” arbor opening and my lathe headstock hasa 1” 8TPI arbor. All my lathe accessories have a 1-1/4” hex nut, if they have...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase