LumberJocks

Of Tool Cabinets, Chewing Gum and Sealng Wax #7: Other Projects - Outfeed Cart

  • Advertise with us
Blog entry by Bill Berklich posted 10-07-2018 07:32 PM 1337 reads 2 times favorited 2 comments Add to Favorites Watch
« Part 6: Lower Case Assembly Part 7 of Of Tool Cabinets, Chewing Gum and Sealng Wax series Part 8: Other projects – Lathe cart »

Life isn’t linear. Nothing, at least in my life, follows a straight line or well-marked path. On the way to working on the Tool cabinet several other projects happened. I’ll start with the Outfeed Cart.

I’ve had all of my sanding supplies just stuffed in a box – actually three boxes and I’ve long wanted a place for everything so I can find it, get it, and store it. Because of my situation I need a couple of features 1) it had to be mobile. 2) it has two slip under my Table Saw wing and 3) it needed some kind of easily adjustable outfeed support.

I’ve made a lot of general casework so I didn’t really bother with a drawing. I started the stack with the 3” double locking casters and knew I wanted a 2×4 top the basically filled in the gap to make the end result 31”. Then for it to fit where I needed it to I made it 22” and 24” deep.

Four Drawers with full extension slides and the drawer fronts are some Costa Rican plywood that’s been laying around forever. No idea what it is but it look pretty!!

The supports are based on a Woodsmith Magazine design with several mods. The “Rollers” aren’t. They are fixed Sched40 pipe which is plenty slick for the wood to slide.

Overall it turned out pretty well.

Oh – here’s a link to the Woodsmith Plans. Not really the cart I built but I took the outfeed supports from it. https://www.woodsmithplans.com/plan/roll-around-shop-cart/

-- Bill - Rochester MI



2 comments so far

View EarlS's profile

EarlS

1941 posts in 2551 days


#1 posted 10-07-2018 09:40 PM

Sweet set-up. Too pretty for my shop. The “rollers” are a nice extra too.

-- Earl "I'm a pessamist - generally that increases the chance that things will turn out better than expected"

View Bill Berklich's profile

Bill Berklich

479 posts in 592 days


#2 posted 11-13-2018 02:55 PM



Sweet set-up. Too pretty for my shop. The “rollers” are a nice extra too.

- EarlS

Probably for mine too but I’ve gotten tired of “Make do’s” Most everything is just cobbled together and “temporary” until I can get around to it but I can never seem to find that “round tuit”. So, I’m trying to change my bad habits.

-- Bill - Rochester MI

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com