BlueRidgeDog's Blog

  • Advertise with us
This blog is written by BlueRidgeDog | 2 entries so far

Latest Entry

Arts and Crafts Dresser #2: Side panels and legs

01-13-2019 10:48 PM by BlueRidgeDog | 4 comments »

I milled up the stock for the legs and panels: Dry fit to test fit and get the final dimensions for the panel: Picked out some amazing grain wood for the panels, milled then book-matched two panels. I had planned on saving this wood for drawers, but I “think” I have enough: Trimmed the panels to width and test fit to mark the arch: Cut the mortises in the legs to take the cross stretcher: Glued up the panels and aggressively smoothed them. Center panel was also gone over as it is hard to get to once glued up: Cut the double taper on the legs then glued them up. When dry I did the same smoothing with a card scraper and sand paper: ...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics