LumberJocks

Moved blog to make on single blog

  • Advertise with us
Blog entry by Blackie_ posted 06-04-2015 10:49 PM 1348 reads 0 times favorited 7 comments Add to Favorites Watch

Not gone, just moved this blog to the original blog to make one single blog.

-- Randy - If I'm not on LJ's then I'm making Saw Dust. Please feel free to visit my store location at http://www.facebook.com/randy.blackstock.custom.wood.designs



7 comments so far

View Sanderguy777's profile

Sanderguy777

158 posts in 665 days


#1 posted 06-04-2015 11:31 PM

You probably don’t want your workbench occupied, but I made a little outfeed table that I nailed to the top of one of my workbenches. It works pretty well. If you do that, I’d make a portable one, so you can take it off.

View DocSavage45's profile

DocSavage45

7703 posts in 2305 days


#2 posted 06-05-2015 12:55 AM

Randy,

Looks like your space ship is ready to launch! I like the project board! I hope to get my 25 gallon air compressor out of my main shop area. How do you get your air nailers etc to function w current setup? Have you checked suction now that you have longer DC lines?

I like the idea of a drop down outfeed table for the saw?????

Rock and roll!!!!!!

-- Cau Haus Designs, Thomas J. Tieffenbacher

View Blackie_'s profile

Blackie_

4531 posts in 1975 days


#3 posted 06-05-2015 03:57 AM

Tom, I have a short rubber hose feeding into 3/4” PVC water pipe from outside under a lean-to it is then piped into my shop and I have an air pressure gauge along with a water catch on the inside.

DC suction works well with this setup.

-- Randy - If I'm not on LJ's then I'm making Saw Dust. Please feel free to visit my store location at http://www.facebook.com/randy.blackstock.custom.wood.designs

View DocSavage45's profile

DocSavage45

7703 posts in 2305 days


#4 posted 06-05-2015 04:19 AM

Ya got it covered.

Where is the rest of the gang????

Goin out to feed the pride.

-- Cau Haus Designs, Thomas J. Tieffenbacher

View stefang's profile

stefang

15512 posts in 2797 days


#5 posted 06-05-2015 08:09 AM

That dust collection system looks real good to me as does the rest of the shop.

-- Mike, an American living in Norway.

View Sodabowski's profile

Sodabowski

2308 posts in 2296 days


#6 posted 06-05-2015 10:42 AM

I thought you were going to use the new bench for the miter saw. Nice setup!

-- Thomas - Pondering the inclusion of woodworking into physics and chemistry classes...

View Roger's profile

Roger

19867 posts in 2267 days


#7 posted 06-09-2015 10:22 AM

Gettin closer every day.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com