BikerDad's Blog

  • Advertise with us
This blog is written by BikerDad | 13 entries so far

Latest Entry

Roubo-ish Workbench Build #13: March of the Dogholes....

12-07-2015 04:54 AM by BikerDad | 2 comments »

So, I’m closing in on the finish line. Since my last blog entry, I’ve made the mortises in the top for the legs, and lo yea verily, it took just a couple swipes with my new LN Rabbet Block plane to get the beastly top segments to drop right on the tenons. After that, I took a break over Thanksgiving and didn’t get back to working on the bench until this weekend. So this weekend, my first task was to cut to the slabs to final length. This simply wasn’t going to do it for me. Life would have been much simpler if I had a radial arm saw, but I don’t. Cutting cleanly through a 4+” slab is a bit of a challenge. The slabs are way too long and heav...

Read this entry »

Older Entries

View all 13 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics