| Blog series by Bigbuck | updated 475 days ago | 2 parts | 631 reads | 10 comments total |
Part 1: 1st Blog
I started this project because I needed something to keep me busy until I decided on my next big project. I got the initial idea of doing a serving tray from the summer contest, not because I thought I could win but because it would give me something to do and also allow me to challenge myself. The bottom is a glued up panel of soft maple with a 1/8” walnut inlay of walnut. I cut the inlay out using the router with a 1/8” bit held free hand cutting close to the line and then c...
Part 2: Done
Well had a interesting time in the mountains. We had a bear that kept coming around, until the Game and fish finally came and took care of him after he broke into a couple of other cabins in the area. After that it was a relaxing time spent catching fish and enjoing the cool mountains Anyway, back to the serving tray. I decided not to add any more keys for fear of messing up a good thing. The silver wire inlay proved to be a little more difficult than I anticipated but for the first ti...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
