LumberJocks

BigD1's Blog

  • Advertise with us
This blog is written by BigD1 | 25 entries so far

Latest Entry

Tung oil finish

11-30-2015 01:34 AM by BigD1 | 4 comments »

Could use some insight on the best way to apply Tung Oil. I’ve read cut the first coat 50-50 with paint thinner. Let stand for 24 hours between coats. Apply 3 coats and call it good. Does this meet the experts opinion. Please reply back. Thank you for your time and knowledge.

Read this entry »

Older Entries

  • Wooden Compass - 09-26-2015 04:44 AM | 5 comments

    Who could tell where I can purchase a Large Wooden Compass for six foot circles. The only one I c...

  • Glueing Ebony wood - 09-23-2015 04:33 PM | 2 comments

    Hello woodworkers. What is the best way to glue Gabon Ebony. How do you prep the wood, and what g...

  • Vicmark 120 chuck - 07-11-2015 03:48 AM | 0 comments

    Can someone tell me, where I can purchase a Pin Jaw, Extended Dovetail Jaw, Spindle Jaw, etc. for...

  • turning redwood logs on a lathe - 05-28-2015 12:13 AM | 3 comments

    I need a memory boost. I watched a video of a gentleman from Ireland, who turns Redwood Logs on a...

  • Finish for Redwood Burl - 02-14-2015 06:16 PM | 1 comment

    I could use some insight for a finish on Redwood Burl. Thanks

  • Sanding Redwood - 02-08-2015 01:26 AM | 3 comments

    I find that 600 grit and 0000 steel wool, both leave sanding lines in my Redwood Burl bowl on the...

  • Natural bark on a Redwood Vessel - 02-07-2015 08:59 PM | 1 comment

    I watched a video where the master turner used a spray finish like a varnish, I believe, to hold ...

  • Sanding Walnut - 07-04-2014 01:10 PM | 7 comments

    Hello fellow woodworkers. How in the world of GOD’S Walnut wood, do I remove hair line, so ...

  • Omni 24 Jig - 03-23-2012 04:57 AM | 1 comment

    I would like to purchase the Omni 24 Jig for dove tails. I would even purchase a used one, if the...

  • New Oneway Lathe - 03-23-2012 04:49 AM | 3 comments

    I just bought a new Oneway 2436 lathe from a private party. The lathe was bought in 2010 and was ...

View all 25 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com