| Blog series by Marcel T | updated 533 days ago | 2 parts | 4249 reads | 11 comments total |
Part 1: Introduction
Hello fellow Lumber Jocks! I’m starting a little blog series on my work-in-progress DIY lathe. In short, I want to build a lathe to turn a few pens, without spending ~$60 some on specifically pen turning materials and ~$200 on a lathe. So, I want to try turning. I’ve always considered myself a handyman-esque person, and I had that urge to build! The tipping point was when I found a few blogs such as AfriGadget, StreetUse and Future Perfect. Their owners travel a lot, and they notice ingenu...
Part 2: The better base!
Hey guys! Taking advantage of the long weekend here in Canada, (so this was last weekend) I made a better base for my dremel. I was taking it apart to see why it was squeaking (trapped sawdust) when the idea hit me – drill the existing screw holes all the way through the body, and get a longer screw to hold the dremel together (like the old screws) and hold the dremel to the base. Well, I didn’t have a screw quite that long and thin, but I did have some short screws of the correct diameter. S...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
