LumberJocks

Brynn's Desk Build #4: Overview of the build

  • Advertise with us
Blog entry by BenhamDesign posted 12-17-2017 09:47 PM 673 reads 0 times favorited 2 comments Add to Favorites Watch
« Part 3: Video: Building the top and Drawer glides - Cherry Writing Desk Part 4 of Brynn's Desk Build series no next part

This writing desk is one of my favorite builds. Made from cherry, with spaltted maple for the side panels and drawer pulls. The drawer pulls are held in place with walnut posts for a little accent. If you are interested in the build process here is a little build video.

I started out milling the legs and cutting them to length. Next, laying out the joinery and drawing in the curve I liked for the legs. It is way easier to cut all the joinery to before cutting the curves. This gives you a square reference face to work from. It is also way easier to clamp a square block that something that is curved.
I cut off most of the shoulder for the tenons on the table saw. I then fined tuned the fit at the bench. If one little thing is off at the table saw or the stretcher is even slightly out of square the shoulder won’t be even if you cut all four sides on the table saw. For this I use a hand saw to cut the top and bottom shoulders away and clean up with a chisel. I find it to be much more accurate. For the thickness of the tenon I cut them just a little fat and sneak up on the fit with a shoulder plane. I know guys who go through extreme measures with feeler gauges to set up the machines so that they fit perfect every time. Or so they say, but if you bump one little setting it all goes to hell. Besides, there is a Zen quality to working with hand tools that I just like to do to finesse the fit.
Once I got the basic framework built I measured out for the side panels and booked matched them. I used the same curve as on the legs, then decided to make it just a little more extreme so I just used my bench top sander to steepen up the curves. (not shown in the video)
For the drawer pulled I really like making my own. It really puts a personal touch on things that you can’t get anyplace else.
Here is a playlist to all the videos in the series if you want to see some more build details

If you want more info on my work please visit my Custom Furniture site or my blog

-- What I do in and out of the shop at http://www.BriansBenham.com



2 comments so far

View WoodwolfAtl's profile

WoodwolfAtl

35 posts in 1476 days


#1 posted 12-18-2017 05:19 AM

Beautiful very well done

View JohnMcClure's profile

JohnMcClure

133 posts in 511 days


#2 posted 12-19-2017 12:54 AM

Beautiful! I’m so glad I took the time to watch the video. I like your router mortising jig, may have to duplicate it someday.
Your furniture is awesome and your videography is nice too.

-- I'd rather be a hammer than a nail

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com