LumberJocks

Cutting board project! #3: Ripping and Glueing the cutting board!

  • Advertise with us
Blog entry by Beginningwoodworker posted 04-28-2009 03:31 AM 1195 reads 0 times favorited 15 comments Add to Favorites Watch
« Part 2: Preping the Stock! Part 3 of Cutting board project! series Part 4: Did more work on the cutting board today and finish it! »

Progess page three!

-- CJIII Future cabinetmaker



15 comments so far

View Scott Bryan's profile

Scott Bryan

27251 posts in 2476 days


#1 posted 04-28-2009 03:34 AM

This is looking pretty good so far.

-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine

View matt garcia's profile

matt garcia

1830 posts in 2326 days


#2 posted 04-28-2009 03:45 AM

Charles,

How wide is that cutting board? Once you clean the dried glue off, are you going to hand plane it flat, or run it through your Delta planer?

-- Matt Garcia Wannabe Period Furniture Maker, Houston TX

View Beginningwoodworker's profile

Beginningwoodworker

13341 posts in 2327 days


#3 posted 04-28-2009 03:47 AM

I am going to run it through the planer.

-- CJIII Future cabinetmaker

View matt garcia's profile

matt garcia

1830 posts in 2326 days


#4 posted 04-28-2009 03:48 AM

You’re getting spoiled!!!!

-- Matt Garcia Wannabe Period Furniture Maker, Houston TX

View Beginningwoodworker's profile

Beginningwoodworker

13341 posts in 2327 days


#5 posted 04-28-2009 03:52 AM

Heheheheh!

-- CJIII Future cabinetmaker

View lew's profile

lew

10031 posts in 2409 days


#6 posted 04-28-2009 04:15 AM

Coming along nicely, CJ!!

Lew

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Napaman's profile

Napaman

5346 posts in 2731 days


#7 posted 04-28-2009 04:21 AM

good timing for mother’s day!!! although it seems like mother’s day happens a lot since may of your projects go to her…

-- Matt--Proud LJ since 2007

View nuttree's profile

nuttree

244 posts in 1978 days


#8 posted 04-28-2009 04:26 AM

I agree – great Mother’s Day gift.

-- I only went out for a walk and finally concluded to stay out till sundown, for going out, I found, was really going in. -John Muir

View Don Newton's profile

Don Newton

712 posts in 2273 days


#9 posted 04-28-2009 04:39 AM

Hey Charles…..Following your blog and like what I see! It’s good to see all of the precautions you are taking for safety, glasses, hearing protection, push sticks. That maple looks like it has a lot of figure. A tip…..use the cheapest wax paper under your glue-up to protect your saw table. It’s also good to use some under the clamps so they don’t stain the wood if they come in contact with the glue. What are you going to use for finish? I have used mineral oil in the past, cheap and easy to get. Keep the blog coming!

Don

-- Don, Pittsburgh

View Beginningwoodworker's profile

Beginningwoodworker

13341 posts in 2327 days


#10 posted 04-28-2009 05:06 AM

I am going to use mineral oil.

-- CJIII Future cabinetmaker

View jack1's profile

jack1

1924 posts in 2681 days


#11 posted 04-28-2009 08:15 AM

Take your time when you plane it. Can’t put it back once it hits the floor! Looks good.

-- jack -- ...measure once, curse twice!

View degoose's profile

degoose

7012 posts in 2009 days


#12 posted 04-28-2009 11:51 AM

Very thorough blog, well documented. Just what a lot of new woodworkers need. Safety first.
Nice and precise!

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...

View PCorl's profile

PCorl

49 posts in 2034 days


#13 posted 04-29-2009 12:54 AM

Good progress so far. You sure got some good looking maple. I am looking forward to seeing the finished project.

View woodworm's profile

woodworm

14125 posts in 2245 days


#14 posted 04-29-2009 07:09 PM

Great effort!
Looking forward to seeing the finished boards.
Take care.

-- masrol, kuala lumpur, MY.

View newTim's profile

newTim

554 posts in 2261 days


#15 posted 04-30-2009 12:13 AM

Looking good. For a good tip on glueing up the pieces flat check out the Woodwhisperer’s page. It will save you a lot of time planing and is easier to scrape the glue off.

-- tim hill www.newcalshop.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase