LumberJocks

Bearpaw's Favorites

  • Advertise with us
View Andy's profile

"Art Box" Tutorial #1: Intro

1867 days ago by Andy | 37 comments »

Updated 1/15/12 How to make an Art Box by Andy Campbell Safety Be safe! Guards, etc…may not be visible in the pictures. This is written for woodworkers of all skill levels.But, please keep in mind that this is not woodworking #101. I am writing this in a step by step manner that should be easy for a beginner to follow, but some basic understanding of tools and terminology is required.I ask that the more advanced woodworkers be patient and not be offended. I don’t wish to test your...

Read this entry »


View Andy's profile

"Art Box" Tutorial #10: Pin Hinges

1831 days ago by Andy | 17 comments »

Updated 1/16/12 I spent a lot of time developing a way to let the lid swing down into the box, yet still maintaining a fairly tight reveal on all four sidesThe difficulty is the lip itself. It doesnt allow the back of the lid to drop into the box, so thats where we need to cut it away a little deeper at the back. I call these pockets.The other difficulty is in getting the hinge placement spot on or it wont open at all or not far enough to stay open. Here is how its done: Use the same pa...

Read this entry »


View JoeyG's profile

Grinder Sculpting #1: the box

954 days ago by JoeyG | 5 comments »

Hello again everyone. I had such a great time doing the last blogs, I just had to do another. This as the name states, will be about sculpting a box with a right angle grinder. I have began using this method after seeing Andy’s and Gary’s wonderful, sculptures that we like to call boxes. I saw it and just new it was something I wanted to get good at. Some people look at chip carving or the spirit in the tree, I saw how with just a little grinding on a straight grain board th...

Read this entry »


View Stevinmarin's profile

Secret-compartment pencil holder.

779 days ago by Stevinmarin | 34 comments »

I designed this project specifically for kids to make. I thought about what kinds of things I liked as a kid, and anything with a hidden compartment fascinated me. Even today, I would love to have one of those Scooby-Doo spinning bookcases that leads into another room! Anyway, this is an easy project that can be made with the fewest of tools and very little woodworking experience.

Read this entry »


View poroskywood's profile

Drunken Cutting Boards #1: Drunken Alice in Wonderland Cutting Board

1782 days ago by poroskywood | 40 comments »

Hey everybody, after a few personal messages here is my version of a how to on a Drunken Checker Board. I of coarse bow to the Chairman of the Board and pay tribute with beer. This is a Off-Checker pattern I call “Drunken Alice in Wonderland” The “serendipitous” nature of this piece is appealing in a far out sort of way. Here Goes… So first I prepare the Material. I am using Hard Maple and Walnut both are surfaced flat and cut 1” x 9” x 14&...

Read this entry »


View degoose's profile

Torque Workcentre at work.. #41: Dimensions and angles...

1211 days ago by degoose | 13 comments »

This is just a quick post to give some information regarding the way I make the wine bottle balancer…You can use other dimensions and it will still work I did research the whole thing and found different angles and other variables…but this is what I have come up with by trial and error… to make the bottle balance in a horizontal position.. not pointing up or down… more aesthetically pleasing.. and if it looks right don’t mess with it… Length…11 ...

Read this entry »


View mafe's profile

MaFeBurnisher (scraper set up tool) Blog updated 4oct2010

1393 days ago by mafe | 28 comments »

MaFeBurnisher BLOGscraper set up tool Ok I posted the project, and here are the blog, since there seems to be some wishes for that now… If there are wishes, I’ll make a work drawing with measures, but I think it’s quite ‘out the road’.(And thank you, I’m better today, so I could spend a little quality time in the work shop 2×40 min.). The project comes from different ideas I have seen around, and the fact I’m not all happy for my VERITAS...

Read this entry »


View Andy's profile

"Palm Box" tutorial

1328 days ago by Andy | 88 comments »

I am very sorry that the tutorial is still down. I lost all the pictures and just have moved on to other things. But the good news is that others have come to the rescue with their own tutorials and are just as good…even better than mine.Here is one by Scott http://lumberjocks.com/projects/58221Andy

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase