LumberJocks

BJODay's Blog

  • Advertise with us
This blog is written by BJODay | 43 entries so far

Latest Entry

Plant stand #9: Finally complete

09-23-2016 04:14 PM by BJODay | 0 comments »

I received the tile and the plan was to cut a mortise in the top and drop it in. I used a forstner bit to hog out the bulk of the waste and used chisels to complete the job. The drill wandered and gouged the top outside of the mortise area. I thought okay, I can add a walnut inlay frame around the inset tile. Well lots of hemming and hawing about how well this would work and look. Finally decided to start the top over. Took only a few hours of labor. This time I used a plunge router to cut the mortise. Worked better. It was a large area to cut with a chisel. This is the bottom of the table top. The two large holes were so I could pop the tile out while working on the fit. Wh...

Read this entry »

Older Entries

View all 43 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com