LumberJocks

BB1's Blog

  • Advertise with us
This blog is written by BB1 | 8 entries so far

Latest Entry

Table Saw setup #3: Outfeed table

12-24-2016 11:45 PM by BB1 | 4 comments »

Today I focused on getting my outfeed table constructed. I used plywood for a base and then I cut three more plywood pieces with the center piece being the size between the miter slots. This allowed me to avoid having to cut dados as i just spaced them as needed on glueup. I use contact cement to attach some laminate that I had leftover from another project. I built a wooden stand from 2×4s (used this concept as I have done with all my shop tableshttp://www.hammerzone.com/archives/workshop/bench/below20xl.html) and attached the top to it. Added some levelers as my shop floor is not even. Surface is about 20×40 inches. Hopefully this will increase safety with longer cuts. ...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com