<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/">
  <channel>
    <title>Alvarez's Blog at LumberJocks.com</title>
    <link>http://lumberjocks.com/Alvarez/blog</link>
    <pubDate>Mon, 24 Oct 2011 17:25:41 GMT</pubDate>
    <description></description>
    <item>
      <title>Kennel Bench</title>
      <link>http://lumberjocks.com/Alvarez/blog/26120</link>
      <description>
        <![CDATA[<p>Working on a unique bench design. Customer has requested that a bench be built to accommodate his 4 dachshunds&#8230;.He has a converted a laundry room into a Mud room. The kennels he has in there now are too large for the dogs, so he wanted something smaller for them. The bench will have a kennel on the bottom of the bench with 2 doors, the openings are set and ready for the doors.<br />He also asked that the bench be tall in order to hide the water lines /drain that are in the wall that were used for the washing room. So with his direction and my design I came up with this unique design, not yet completed.<br />Made of Pine&#8230;.</p>]]>
      </description>
      <pubDate>Mon, 24 Oct 2011 17:25:41 GMT</pubDate>
      <guid>http://lumberjocks.com/Alvarez/blog/26120</guid>
      <author>Alvarez</author>
      <dc:creator>Alvarez</dc:creator>
    </item>
    <item>
      <title>Dado Set</title>
      <link>http://lumberjocks.com/Alvarez/blog/13268</link>
      <description>
        <![CDATA[<p>I need someone&#8217;s expertise, I have a 10&#8221; Delta Table Saw, not a full size table saw, I have a dado set that makes the saw just shake and makes it difficult to cut accurate dados, is there a particular dado set made for the smaller table saws?</p>]]>
      </description>
      <pubDate>Mon, 25 Jan 2010 17:46:25 GMT</pubDate>
      <guid>http://lumberjocks.com/Alvarez/blog/13268</guid>
      <author>Alvarez</author>
      <dc:creator>Alvarez</dc:creator>
    </item>
  </channel>
</rss>
