| Blog series by Alonso | updated 15 days ago | 2 parts | 734 reads | 14 comments total |
Part 1: Sharpening Machine / Jig part 1
I’ve been working on this Jig for quite a while now, about 2 months perhaps. I got to say that I’m very pleased with the final results, even thought there still some minor flaws that I need to complete (but I feel that the main part is ready to be shared) This jig was published on Shopnotes #107 just in case anyone would like to try to build this one too. I already tried on my drill press and works like a charm. I hope by this weekend to be able to add some kind of finish, t...
Part 2: Adding some finish + angle gage & clamp block
So today I had some free time, I add it some finish to the entire machine, since this is not any kind of furniture at all I decided to to go the hard way, I basically applied some spray paint, the maple parts had some wipe on poly. I also got the time to add the missing angle gage and the clamp block. All I need now is to get some different sandpaper grits and this baby should be ready to be put to the test. I will also like to ask a question. What grits of sandpaper should I get? I ...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
