I have been away from the shop most of this last week out of town working but I did finish up the Bobbin assembly. This weekend I will concentrate on sanding and gluing everything together. So after I drew a couple of 3” circle on some ch...
|View Alongiron's:||home||workshop||projects (69)||blog (15)||reviews (3)||forum topics (20)||buddies (43)||favorites (38)||activity log|
552 posts in 2114 days
Location: Greencastle, Indiana
I live in a little town just outside of Indianapolis. All my children are raised and gone. I have always wanted to put up a small workshop so I can park my car in the garage where it belongs! I like to make and design Arts and Crafts projects. I do not sell anything, I make things to give away as gifts. If I start making them for a stipen, then it becomes work and I just want to keep it a hobby. There is so much satisfaction in giving a gift from the heart rather then from the store!
-- Measure twice and cut once.....Steve Lien
Latest Activity | view all »
|replied on||Blum Tandem 563H Soft - Close Full Ext. Under-Mount Drawer Slides Questions||09-22-2016 09:30 PM|
|commented on||Box Elder Pot||09-13-2016 07:11 PM|
|commented on||Spinning wheel #13: Finishing up the parts||09-10-2016 09:59 PM|
|added blog entry||Spinning wheel #13: Finishing up the parts||09-10-2016 01:04 PM|
|commented on||Shutters||09-07-2016 11:43 AM|
|commented on||Spinning wheel #12: Spindle Shaft complete||09-03-2016 12:24 PM|
|added blog entry||Spinning wheel #12: Spindle Shaft complete||09-03-2016 10:57 AM|
|commented on||Walnut Table||08-28-2016 07:06 PM|
|added blog entry||Spinning wheel #11: Making the Bobbin||08-26-2016 06:55 PM|
|commented on||Spinning wheel #10: Tapered pegs today||08-26-2016 06:36 PM|
|added blog entry||Spinning wheel #10: Tapered pegs today||08-26-2016 01:25 AM|
|added blog entry||Spinning wheel #9: Yes!! It is turning!!||08-25-2016 12:48 AM|
|added blog entry||Spinning wheel #8: "Turned " the lights back on!||08-24-2016 12:45 AM|
|commented on||Noodle Cutter||08-23-2016 10:05 PM|
|commented on||Lathe Tool Rack||08-21-2016 03:52 AM|
Latest Projects | view all 69 »
Latest Blog Entries | view all 15 »
After a few days out on the road working my “Real” job, I was able to get back in the shop and complete the spindle shaft. It is made up from taking a 3/8” brass tube and slowly file an orifice in it. This is where the wool will ...
If my name was Jim and I lived in Michigan, this would be the easy part but my name is Steve and I live in Indiana!! First thing is to drill a 5/16” centered hole through a 6” square piece of Cherry and turn it to 3/4 inch. Next...
I made some small but big progress today in the right areas. I set the main axle pegs in place today using my tapering tool. I drilled out the holes 1/8” smaller than the peg itself (3/8”) Using my tapering tool, the top of the...
My true passion is to be a blacksmith, so today I did a little bit of that to build my big wheel axle. I mounted it to the wheel I turned and set the treadle bar with extended hinges I set the treadle with 3-5/16” dowels...